Yamaha H01 owner manual Keyboard Stand Assembly, Place a on top of the pads

Page 22

Keyboard Stand Assembly

Keyboard Stand Assembly

ENGLISH

CAUTION

•Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble the unit in the appropri- ate sequence.

•Assembly should be carried out by at least two persons.

•Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product.

•Be sure to tighten all screws upon completing assembly of each unit.

•To disassemble, reverse the assembly sequence.

Have a Phillips-head (+) screwdriver ready.

Remove all parts from the box. Conﬁrm that all parts shown in the illustration are provided.

		CAUTION			A
Be careful not to pinch your ﬁn-					A
gers when setting the instrument
on the ﬂoor.
on the ﬂoor.

C

E D

B

6 x 30 mm long screws x 4

6 x 20 mm short screws x 10

4 x 6 mm small screws x 6

Before starting installation, remove the vinyl ties that bundle the pedal cord and AC power cord.

F

Remove two rectangle pads (800 x 130 mm) from the packing box.

1. Place A on top of the pads.

1-1Locate two pads (F) so that they will be posi- tioned about 30 cm inside from the left and right edges of A.

1-2Place A on top of the pads.

CAUTION

Do not position the pad under the control panel.

A

30 cm

30 cm

pads

20

22H01 Owner’s Manual

Image 22

Contents Digital Piano Special Message Section Please Keep this Manual English Connections Stylish and sophisticated digital piano Main FeaturesAccessories Authentic Acoustic Piano-like Touch Natural Wood KeyboardTable of Contents Panel Controls and Terminals EnglishClosing the key cover and lid Before Using the H01Opening the key cover and lid Lift open the key cover and fold it back- wardUsing Headphones Turning the Power OnSetting the Volume Press the Power switch to turnAdjust the volume Listening to the 50 Piano Preset SongsPress the Power switch to turn the power on Listen the preset songsStart/Stop the song What is SMF Standard Midi File?Listening to songs in the USB Flash Mem- ory Data formatTo connect the USB Flash Memory To protect your data write-protect switchUSB Flash Memory USB ﬂash memorySpecify the track to all tracks ALL Specify the Song Track and Play the SongSpecify the track to 1 and 2 tracks 1+2 Key Selecting & Playing VoicesSelecting Voices DescriptionSostenuto Center Pedal Using the PedalsDamper Right Pedal Soft Left PedalCombining Voices Dual Setting the OctaveSetting the Balance Reverb in DualSelecting a Reverb Type Adjusting Reverb DepthAdding Variations to the Sound Reverb Key Reverb Type DescriptionFine tuning of the Pitch TranspositionTouch Sensitivity Setting the Touch Sensitivity TypeKey Touch Sensitivity Description Troubleshooting Problem Possible Cause and SolutionPlace a on top of the pads Keyboard Stand AssemblyHave a Phillips-head + screwdriver ready Attach B Raise a to the vertical positionAttach C Connect the cords Install the pedal structureReplace the groove covers Rotate the adjuster Raise aAppendix Music Rest / Notenablage / Pupitre / Atril YMR-01 FCC Information U.S.A North America WG91890