Yamaha H01 owner manual Install the pedal structure, Connect the cords, Replace the groove covers

Page 24

Keyboard Stand Assembly

6. Install the pedal structure.

6-1Remove the covers from the grooves on the bot- tom surface of A.

ENGLISH	6-2Align the pedal power cords (that come out from
	6-2Align the pedal power cords (that come out from
	the pipes of D) along with the grooves on the bot-
	tom surface of A.

6-3Align the holes on the bracket of D with the holes on A, then attach D to A by tightening four long screws (6x30 mm).

D A

CAUTION

Be careful not to pinch the cords between the bracket and the surface of A.

7. Connect the cords.

7-1Connect the pedal cord plug to the pedal connec- tor in the correct orientation.

7-2Connect the power cord plug to the power con- nector in the correct orientation.

8. Replace the groove covers.

8-1Insert the pedal cord and power cords into the grooves securely, then attach the groove covers.

Correct

Incorrect

24H01 Owner’s Manual

Image 24

Contents Digital Piano Special Message Section Please Keep this Manual English Connections Main Features AccessoriesStylish and sophisticated digital piano Authentic Acoustic Piano-like Touch Natural Wood KeyboardTable of Contents Panel Controls and Terminals EnglishBefore Using the H01 Opening the key cover and lidClosing the key cover and lid Lift open the key cover and fold it back- wardTurning the Power On Setting the VolumeUsing Headphones Press the Power switch to turnListening to the 50 Piano Preset Songs Press the Power switch to turn the power onAdjust the volume Listen the preset songsWhat is SMF Standard Midi File? Listening to songs in the USB Flash Mem- oryStart/Stop the song Data formatTo protect your data write-protect switch USB Flash MemoryTo connect the USB Flash Memory USB ﬂash memorySpecify the Song Track and Play the Song Specify the track to all tracks ALLSpecify the track to 1 and 2 tracks 1+2 Selecting & Playing Voices Selecting VoicesKey DescriptionUsing the Pedals Damper Right PedalSostenuto Center Pedal Soft Left PedalSetting the Octave Setting the BalanceCombining Voices Dual Reverb in DualAdjusting Reverb Depth Adding Variations to the Sound ReverbSelecting a Reverb Type Key Reverb Type DescriptionFine tuning of the Pitch TranspositionSetting the Touch Sensitivity Type Touch SensitivityKey Touch Sensitivity Description Troubleshooting Problem Possible Cause and SolutionKeyboard Stand Assembly Place a on top of the padsHave a Phillips-head + screwdriver ready Raise a to the vertical position Attach BAttach C Install the pedal structure Connect the cordsReplace the groove covers Rotate the adjuster Raise aAppendix Music Rest / Notenablage / Pupitre / Atril YMR-01 FCC Information U.S.A North America WG91890

6. Install the pedal structure.

ENGLISH

7. Connect the cords.

8. Replace the groove covers.