Yamaha owner manual Buying discs for the MD4S, MD Data and MiniDisc

Page 7

10 Welcome to the MD4S

The recording/playback pitch can be adjusted up to a maximum of ±10%. In addition, you can use the x1/2 play function to playback at half-speed with a pitch that is one octave lower.

MIDI Time Code (MTC) / MIDI Clock data can be transmitted from the MIDI OUT connector. This allows synchronization with a MIDI sequencer or rhythm machine without using up a recording track. In addition, MTC from an external device can be received at the MIDI IN connector, allowing the MD4S to be synchronized to external video/audio devices.

MIDI Machine Control (MMC) can be received, allowing the transport of the MD4S to be controlled from a MIDI sequencer or other external device.

Buying discs for the MD4S

The MD4S can use two types of disc: MD DATA and MiniDisc. MD DATA discs can be used for 4-track recording/playback, and MiniDiscs can be used for recording/playback of up to two tracks. (They cannot be used for 4-track recording/playback.)

MD DATA and MiniDisc

MD DATA are widely used for computer data storage, and the MD4S uses the audio format of this type of disc.

MiniDiscs (also known as MD) are used only for music.

Type

MD DATA

MiniDisc

 

 

 

 

 

 

 

Logo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4-track recording/

Yes (37 minutes per track)

No

playback

 

 

 

 

 

 

 

 

 

 

 

 

 

2-track recording/

Yes (74 minutes)

Yes (74 minutes)

playback

 

 

 

 

 

 

 

 

 

 

 

 

 

Monaural recording/

Yes (148 minutes)

Yes (148 minutes)

playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• These discs are for computer stor-

• These discs are for music. Two

 

age applications, and can be pur-

types are available: playback-only

 

chased at computer shops. Two

and rewritable. If you use the

 

types are available: playback-only

rewritable type, you can record up

 

and rewritable. Use the rewritable

to two tracks.

 

type with the MD4S.

• MiniDiscs recorded on the MD4S

 

• MD DATA discs recorded on the

can be played back on a conven-

 

MD4S cannot be played back on a

tional MD player.

 

conventional MD player.

• MiniDiscs recorded on a conven-

Notes

• MD DATA discs that have been

tional MD recorder can be edited

used to store computer data can-

on the MD4S, but if the music

 

 

not be used as is by the MD4S.

includes a song that was digitally

 

Such discs must first be formatted

copied from a copy-protected

 

for audio use. See “Erasing a disc

music CD, editing will not be pos-

 

(Disc Erase)” on page 86 for more

sible.

 

information.

 

 

 

 

• Songs that were recorded in 8-

 

 

 

 

track mode on a recorder such as

 

 

 

 

the MD8 cannot be played back

 

 

 

 

on the MD4S.

 

 

 

 

 

 

 

 

 

 

—Owner’s Manual

Image 7
Contents Multitrack MD Recorder Varoitus Safety Instructions Read the Following Before Operating the MD4S Operating Notes Keep This Manual For Future ReferenceCopyright Mixer MD4S FeaturesRecorder MD Data and MiniDisc Buying discs for the MD4SRecording modes and recording times To update the TOCMD4S songs and blank areas Gain control Flip switchFront and rear panel Mono InputsPAN control CUE PAN/CUE Level controlsEQ controls AUX controlMonitor/Master section Stereo InputsDisc transport buttons Disc transport sectionLast REC Search IN/OUT, SET buttons Auto Punch I/O buttonSong Search / buttons B repeat buttonExit button Peak Hold buttonDisplay button Function buttonsDisplay TOC Edit indicatorStatus indicators Pitch indicatorTrack recording indicators Time counter modeMidi indicators CUE MIX indicatorRepeat indicator Auto punch indicatorIN, OUT indicators Marker indicatorsMIC/LINE Input 3, 4 jacks Top panel connectorsMIC/LINE Input 1,2 jacks Insert I/O jacksRear panel Punch I/O jack Midi IN, OUT, Thru connectorsFront panel Phones jackExample connections Before you beginPreparations for recording Recording the first track Direct RecordingTurning on the MD4S Inserting a discSelect the track for recording Find a blank areaCheck the recording level Start recording Monitor the signal being recorded on the trackBegin recording Press the Last REC Search in button Listening to the first trackSelect the track to record OverdubbingListen to the recording Start recordingPress the Play button to begin recording Mixdown Connecting a master recorderAdjust the mix balance of each track Turn on the Monitor Select Stereo switchRecord to your master recorder Press the Monitor Select 2TR in switchListen to the master recording After completing the Basic Operation section Advanced techniques on the MD4S 4 a B C Mixing multiple channels as you recordConnect the audio sources to MIC/LINE Input jacks Turn on the Monitor Select CUE switchSignal flow when mixing multiple channels Ping-pong recording Set the Flip switches of input channels 1-4 to PB Signal flow for ping-pong recording Make preparations for mixdown Adding sounds during mixdownConnect your audio sources to MIC/LINE Input jacks 1 Turn on the CUE MIX to Stereo switch Applying effects Using the Insert I/O jacksExternal effect connections when using an insertion cable Output jack L Input jack Using the AUX Send jacksRaise level control 5/6 Applying effects during mixdownApplying an effect during ping-pong recording Raise level control 5/6 Raise the CUE Level controls of input chan- nels Applying an effect only to the monitor signalST Bus Manual punch-in/out Punch-in/out using the REC buttonPress the REC button and adjust the recording level Punch-in/outMake preparations for manual punch-in/out Punch-in/out using REC SelectPress the foot switch Punch-in/out using a foot switchPress the foot switch once again to enter pause mode Auto punch-in/out Setting the pre-roll/post-roll timesSpecify the auto punch-in/out points Press the Auto Punch I/O button Single-take auto punch-in/outPress the Enter button Press the Play button to begin the actual auto punch-in/out When stopped or paused, press the REC buttonPress the Play button to hear the recorded result Multi-take auto punch-in/out With Next Take shown in the display, press the Enter button From a stopped or paused condition, press the REC buttonPress the Play button to begin auto punch-in/out Press the Enter button once again to finalize the take Locating to a specified time Press the Display button to switch the time counter modeQuick search functions Searching for songsSearching for Markers Locating to the Last Record In/Out PointPress the TOC Write button to update the TOC Cursor shuttle Display Playback volume Rotate the Cursor shuttle toward the right Erasing a marker or auto punch-in/out pointRotate the Data dial toward the right Play forward/backward at various speeds Cue/Review Various playback functionsPlaying a song repeatedly One Song Repeat/All Song Repeat Playback at half speed x1/2 PlayPress the Enter button to begin programming the cue list Repeating a specific portion of a song A-B RepeatCue List playback Rotate the Data dial to select either Edit List or NEW ListPress the Play button to begin Cue List playback Press the Enter button once againOriginal song Creating a new song from a Cue List Cue List CopyRotate the Data dial to select either Edit Prog or NEW Prog Programming the song playback order Program PlayPress the Enter button to begin programming Press the Play button to begin Program Play Copying a portion of a track Part Copy Editing functionsLocate to the copy destination, and stop or pause playback Erasing a section of a track Part Erase Press the Enter button to execute the Part Erase operation Copying an entire track to another track Track CopyCopying/converting a song Song Copy Erasing an entire track Track EraseRotate the Cursor shuttle to the right 4T1234 2T12Press the Enter button to execute the Song Copy operation Erasing a song Song EraseSplitting a song into two Song Divide Rotate the Data dial to select the songs that will be joined Joining divided songs together Song CombineMoving a song Song Move Exchanging the order of songs Song Renumber Before Song Renumber Other functions Adjusting the record/playback pitch Pitch functionPress the Pitch button Titling discs and songs Erasing a disc Disc Erase Viewing disc contentsPress the Song Search button to select a blank area Changing the recording modeRotate the Data dial to select either 86 or Adjusting the display brightnessRotate the Data dial to adjust the brightness Selecting the type of Frame displayFlashing Using a Foot switchMidi functions Connecting the MD4S with a Midi systemSynchronizing the MD4S with a Midi sequencer Rotate the Data dial to make the display read MTC Master Synchronization using MTCTransmit MTC from the Midi OUT connector of the MD4S About MTC and Midi ClockRotate the Data dial to make the display read Midi Clock Synchronization using Midi ClockMidi sequencer settings Transmit Midi Clock from the Midi OUT connector of the MD4SCharacter a that indicates the step will blink Synchronizing two MD4S recorders Rotate the Data dial to make the display read MTC Slave Settings for the MTC Slave MD4SSynchronized recording on a slave MD4S Start the master MD4S running play/record/rehearsal Start the master MD4S playback/record/rehearsalSynchronized playback of a slave MD4S Press the Play button on the slave MD4SPress the Utility button to return to normal operation Synchronizing to MTC with a specified offset time differenceControlling the MD4S by MMC Switching MMC reception on/offRotate the Data dial to switch the setting on or OFF Press the Enter button to confirm the settingSetting the MMC Device ID Section How many songs can I store on an MD Data disc? TroubleshootingDo I have to clean the MD4S heads? Do I have to sacrifice one track to record timecode?Cannot use the punch-in/out Blank Display MessagesAuto Punch Record Standby Modes of the MD4S transportSpecifications General DimensionsBlock Diagram Glossary Glossary Appendix Tempo Map Chart Midi Implementation Chart Numerics IndexSong Search Tracking Sheet