To erase a programmed sequence during programming, press STOP. C;CEHO disappears.
To erase a programmed sequence after programming, press PROGRAM. Then press STOP. C;CEHOýdisappears.
To erase a programmed sequence at any time, press OPEN/ CLOSE, or press POWER.
-#4#1-'
When a microphone is plugged into MIC 1 or MIC 2, the system mixes the microphone output with recorded music from CDs or CDGs. Rotate MIC VOLUME to a comfortable listening level, and AUTO VOICE for the best balance between playback and microphone levels.
Rotate ECHO to add depth and richness to vocals.
5KPIKPI"#NQPI"9KVJ"#"%&1%&)"
1.Press POWER to turn on the system. The POWER indicator turns on.
2.Load a CD/CDG in the CD compartment.
3.Set AUTO VOICE to the desired position, to enjoy both the music and original singer’s voice. Whenever you sing along, the original singer’s voice is cancelled.
4.Press PLAY/PAUSE to start play.
5.Adjust MASTER VOLUME to the desired level.
6.Set the microphone’s ON/OFF switch to ON and rotate MIC VOLUME to adjust the microphone’s volume.
7.Sing directly into the microphone along with the music.
8.Adjust ECHO for the desired reverberation.
9.When you finish, press STOP on the CD/CDG. Then press OPEN/CLOSE to open the compartment door and remove the CD.
10.Set each microphone’s ON/OFF switch to OFF, then press POWER to turn off the system.
7