b)Mac Users
3.Authorize Live Lite: In order for the Save and Render to Disk functions to be active in Live Lite, the software must first be authorized. Authorization requires that you enter the serial number printed on the card included with the Live Lite CD. You may be prompted for this serial number the first time you run Live Lite. Once the authorization screen appears, enter the number and follow the onscreen directions.
1.Connect the Microphones: First, attach the supplied hard mounts to mic stands (not included). Second, carefully fasten the two Nova microphones to the hard mounts. Third, connect the female end of one of the supplied XLR cables to the left Nova, then connect the other end to the XLR jack labeled “Ch. 1” on the back of the MobilePre USB. Repeat the same procedure for the second microphone, plugging the XLR cable into “Ch. 2” on the back of the MobilePre USB. Finally, engage the “Phantom Power” switch on the front of the MobilePre USB. The red indicator will illuminate. Phantom power must be engaged or the Nova microphones will not function.
2.Attach Speakers or Headphones: If you wish to listen back and monitor your recordings, you’ll want to either connect a pair of headphones to the
Configuring Live Lite
Before we can begin recording in Live Lite, we must change a few preference settings within the program to ensure the MobilePre USB is the source for recording. It is assumed you have completed all the above installation steps successfully.
1.Launch Live Lite. You’ll notice a tutorial lesson displayed on the
2.Click the File menu and choose New Live Set