61200375L1-1 TA 850 T1 RCU VoATM UIG/61200376L2-31A
Page 31 of 72
Configuring WAN Settings – ATM Config
Use the WAN menu (Figure 5) to access the ATM CONFIG menu.
Figure 5. WAN Menu
Use the ATM CONFIG menu (Figure 6) to set the parameters listed below the figure.
Figure 6. ATM Config Menu
>Idle Cells
The IDLE CELLS format must be configured for either ATM FORUM or ITU. Configuring this setting incorrectly for a particular circuit will cause poor performance at the ATM layer.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of the circuit.
© 2001, ADTRAN, Inc. | TA 850 User Manual |
