T1 RCU VoATM
>Data Scrambling
DATA SCRAMBLING can be ENABLED or DISABLED for cell traffic. Configuring this setting incorrectly for a particular circuit will cause poor performance at the ATM layer.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of the circuit.
Configuring WAN Settings – ATM Stats
Use the WAN menu (Figure 5 on page 31) to access the ATM STATS menu (Figure 7) and view the parameters listed below the figure.
Figure 7. ATM Stats Menu
>AP: Tx Cells
This is the number of cells transmitted.
>AP: Rx Cells
This is the number of cells received.
>AP: Rx OAM Cells
This is the number of OAM cells received
>AP: Receive Cells Discarded
This is the number of cells received and discarded. An incrementing count in this field could indicate a con- figuration problem with the ATM layer.
>AP: Receive Cell Errors
This is the number of cells received with an HEC error.
TA 850 User Manual | © 2001, ADTRAN, Inc. |
