61200375L1-1 TA 850
T1 RCU VoATM UIG/61200376L2-31A Page 66 of 72
Voice Turn Up
Step | Action | |
|
| |
1 | From the TA 850 main menu, select the WAN menu. (Here you set up | |
the ATM network.) | ||
| ||
|
| |
2 | Select the ATM CONFIG menu. | |
|
| |
3 | Enter the IDLE CELLS format for your network. | |
|
| |
4 | Set DATA SCRAMBLING appropriately for your network. | |
|
| |
| Back all the way out to the top level TA 850 menu, and then select the | |
5 | VOICE menu. (From this menu, the appropriate Voice information for | |
| working with the Voice Gateway is entered.) | |
|
| |
| Select CONFIG, and from the CONFIG menu, enter the Gateway type | |
| under CALL CONTROL and enter the VPI and VCI values for | |
6 | communicating with that Gateway. | |
| For this application, CALL CONTROL should be set to Jetstream and the | |
| VPI and VCI values should be set appropriately for your network. | |
|
| |
| To verify correct setup, use the STATUS menu (under the VOICE menu) | |
| to look at the current status of the voice connection. | |
| Under STATUS, you can view the GATEWAY STATS and information | |
7 | about the voice PVC along with information about the POTs ports | |
| available on the Gateway. | |
| The GATEWAY STATS menu should show the Gateway Link is up (if | |
| everything is configured correctly). | |
|
|
TA 850 User Manual | © 2001, ADTRAN, Inc. |
