INPUTS & OUTPUTS
Input and Output Jacks:
35.MIC INPUT: XLR balanced input optimized for a microphone or other low impedance source. Pin 2 is the positive input. Because of the wide range of gain adjustment, signal levels up to +22dBu can be accommodated.
36.LINE INPUT: 1⁄4” balanced (TRS) 10K ohm impedance input. The tip is the positive input, which should be used for unbalanced inputs. It has 20 dB less gain than the XLR input and does not have phantom power available. The Mic and Line inputs should not be used simultaneously.
37.STEREO INPUTS: Channel 11/12 and 13/14 are stereo channels with both RCA and 1⁄4” inputs. The RCA and 1⁄4”jacks in each channel are wired in parallel and can’t be used simultaneously.
37
36
35
38.EFFECTS SEND: An unbalanced output of the dry signal that is also sent to the internal effects processor. It can be used to drive an external effects unit or as an additional monitor output (Monitor3). If used as an additional output, be sure to mute the internal effects processor.
39.AUX OUTPUT: A TRS balanced output from the Aux level control. It has a mono version of the record output signal with an independent level adjustment.
40.L/R TRIM:
12