Fostex VM04 Effect Send setting, Effect POST/PRE setting, Rotate the Data Encoder clockwise

VM04 Owner’s manual

6-4. EFFECT SEND setting

1.Press the VIEW key so that the EFF dot is flashing on the VIEW Status Indicator.

The LCD Display will show the following message:

Character section

This will display “1-Eff: 0”. This means that you can now adjust the Channel 1 EFFECT SEND setting. At this point the setting is zero, dry.

CH	MASTER				SCENE NO.
OL		MAX
		R
0
6
12
24
48		L
1 2 3 4 L R 1	2 3 4	MIN	PAN	LO	HI	EFF
LEVEL	VIEW				EQ

2.Rotate the DATA ENCODER clockwise.

The display on the Character section will change to 00 ~ 99 and the Effect sound will become louder. At the same time, a flashing dot will appear on the Channel 1 VIEW display and move upwards.

Indicates 0 ~ 99.

CH	MASTER				SCENE NO.
OL		MAX
		R
0
6
12
24
48		L
1 2 3 4 L R 1	2 3 4	MIN	PAN	LO	HI	EFF
LEVEL	VIEW				EQ

VIEW display

Nothing will show here as the EFFECT SEND level is set to Nil at the moment.

A dot moving up and down. EFF dot is flashing.

<Useful info>

When turning the DATA ENCODER, the position display will read 0 ~ 99 with a 100 step digital indication. But, the actual EFFECT SEND level is -∞~ +6dB.

See EFFECT MODE (page 18) for more details of the internal digital Effect.

6-5. EFFECT POST/PRE setting

1.Press the VIEW key just once more at the previous EFFECT SEND setting.

There will be no change on the VIEW Status Indicator but the LCD Display will show the following message:

Character section

This will display “1-P/P: Pst”. This means that you can now choose the Channel 1 EFFECT SEND in either the Post-Fader or Pre-Fader position. At this point the setting is Post-Fader.

CH	MASTER				SCENE NO.
OL		MAX
		R
0
6
12
24
48		L
1 2 3 4 L R 1	2 3 4	MIN	PAN	LO	HI	EFF
LEVEL	VIEW				EQ

2.Rotate the DATA ENCODER clockwise.

The display on the Character section will change from “Pst” to “Pre” and the EFFECT SEND point setting will switch over to the Pre Fader position. Also, the VIEW display will change and the top three dots will start flashing.

	Indicates Pst or Pre.
CH	MASTER		SCENE NO.
OL		MAX
		R
0
6
12
24
48		L
1 2 3 4 L R 1	2 3 4	MIN	PAN LO HI EFF
LEVEL	VIEW		EQ
Moves up or down at each 3rd digit.			EFF dot is flashing.

VIEW display

The bottom three dots will flash on the bar-graph.

See EFFECT MODE (page 18) for more details of the internal digital Effect.

<Useful info>

The setting indication on the VIEW display will remain as a dot even after quitting the CHANNEL EDIT MODE, e.g., PAN, EQ Lo, EQ Hi, EFFECT SEND and EFFECT POST/ PRE. So you can easily confirm the setting of all four channels at once in the Normal Mix mode. Press the VIEW key to choose the setting by referring to the VIEW Status Indicator.

17