Table of Contents | Fostex VM04 specs

Table of Contents
Precautions	3
Let’s examine the VM04 in more detail	4
1. Input Section	5
2. Buss Section	6
3. Master Section	6
4. Effect Section	7
1. Names and Functions	8
2. Before Use	10
2-1. Remove the insulation paper	10
2-2. Caution when powering ON	10
2-3. Reset	10
2-4. Internal battery for the memory back up	10
3.Applications	11
4. Initial Setting	13
5. Normal Mix Mode	14
6. Channel Edit Mode	15
6-1. PAN setting	15
6-2. EQ Lo setting	16
6-3. EQ Hi settint	16
6-4. EFFECT SEND setting	17
6-5. EFFECT POST/PRE setting	17
7. Effect Mode	18
7-1. EFFECT TYPE setting	19
7-2. EFFECT PARAMETER setting	20
Reverb Level setting	21
Reverb Time setting	21
Pre-Delay Time setting	21
High Dump setting	21
Early Reflection Balance setting	22
8. Scene Memory	22
8-1. Scene Store	22
8-2. Scene Recall	23
8-3. Fader Adjust mode	24
8-4. Scene Direct Recall	24
9. SETUP Mode	25
10. Other Modes	26
10-1. Software Version Check	26
10-2. Battery Check	26
Specifications	27

VM04 Owner’s manual

Precautions (please read before use)

Power supply

*When unplugging the AC adaptor from the outlet, be sure to grasp the adaptor. Attempting to unplug it by pulling on the AC cable may damage the wiring.

*It is dangerous to use any power cable that is cut or frayed. If the power cable is damaged, immediately stop using it, and have it repaired.

*Do not plug in or unplug the AC adaptor with wet hands. Doing so may result in dangerous electric shock.

*Do not open the unit or touch any parts inside. Doing so may result in a dangerous electric shock, and could damage the unit.

*Do not let water or other liquids, flammable materials, or metal objects such as pins get inside the unit. These things may cause electrical shock or short circuit the VM04, and damage it.

If the VM04 should become wet, unplug the AC adaptor from the AC outlet, and contact your authorized service station.

Location

*Avoid using the VM04 in the following locations:

*Locations of extreme low or high temperatures, or extreme changes in temperature.

*Locations with excessive moisture or dust.

*Locations where direct sunlight falls for an extended time, or near a stove or other source of heat.

*Locations where electrical voltage varies.

*Unstable locations or where there is heavy vibration.

*Near strong magnetic fields (on top of a television or speaker).