VM04 Owner’s manual
Channel Fader Recall (chRCL)
ON : Default setting
OFF
If you set this mode to OFF when recalling the Scenes, the INPUT Channel Faders will not recall their stored positions, but their settings before recalling the Scene will remain effective. The INPUT Faders will work normally in all modes including the Scene Store mode, regardless of whether this setting is ON or OFF.
Master Fader Recall (MsRCL)
ON : Default setting
OFF
If you set this mode to OFF, when recalling the Scenes, the Master Fader will not recall its stored position, but its setting before recalling the Scene will remain effective. The Master Fader will work normally in all mode including the Scene Store mode, regardless of this setting whether this setting is ON or OFF.
3.Press the ENTER key after having confirmed the mode you want is shown on the character section.
The mode name will stop flashing and either ON or OFF will start flashing instead.
4.Rotate the DATA ENCODER to choose the ON or OFF setting.
If you turn the dial clockwise, ON will appear. And if you turn the dial
5.Press the EXIT key after you have decided which setting you want: either ON or OFF.
This completes the set up and the VM04 will return to the Normal Mix mode. The Setup will be kept even after powering OFF.
10. Other modes
Here we discuss some additional modes on the VM04, although these are not directly connected with ordinary usage. There are two modes available: “Software Version Check” and “Battery Check”.
10-1. Software Version Check
Press the EFFECT TYPE key while holding the EXIT key and ENTER key together.
The character display will display the Software Version of your VM04 for a second, and then return to the Normal Mix mode.
CH MASTER
| OL |
| 0 |
FADER ADJUST | 6 |
12 | |
| 24 |
| 48 |
|
|
|
|
|
| SCENE |
|
|
|
|
| RECALL | STORE |
|
|
|
| SCENE No |
|
|
| MAX |
|
|
|
|
|
| R |
|
|
|
|
|
|
|
|
|
|
| EFFECT |
|
|
|
| EQ | TYPE | PARAMETER |
| L |
|
|
|
|
|
1 2 3 4 L | R 1 2 3 4 MIN | PAN | LO | HI | EFF |
|
LEVEL | VIEW |
|
| EQ |
| SETUP |
Press the EFFECT TYPE key while holding the EXIT key and ENTER key.
| VIEW |
CHANNEL EDIT |
EXITENTER
1 | 2 | 3 | 4 | MASTER |
|
|
|
| DATA |
MAX | MAX | MAX |
| MAX |
MIN | MIN | MIN |
| MIN |
10-2. Battery Check
Press the EFFECT PARAMETER key while holding the EXIT key and the ENTER key together.
The character section will show the voltage of the memory backup battery inside your VM04 for a second, and then return to the Normal Mix mode. If the voltage falls below 2.2V, the message “BattEmpty” will appear when powering ON.
26