Fostex VM04 owner manual Effect Parameter setting

Page 20

VM04 Owner’s manual

7-2. EFFECT PARAMETER setting

You can alter the parameter setting according to the Effect type.

The parameters available in each Effect type.

The available parameters differ according to the Effect type. These are discussed here.

1. Reverb related Effects

The 12 Effects from 1:HallRev1 to 12:Stadium2 are the Reverb related Effects.

They have five parameters:

1.Reverb Level (RevLv : 0~99)

2.Reverb Time (RevTim: 0.1~9.9 Sec)

3.Pre Delay Time (PreDl: 0~150 mSec)

4.High Dump (HiDmp: 0~10)

5.Early Reflection Balance (ErBal: 0~99)

5. Combined Chorus/Reverb Effect

18:Cho+Rev is the Effect you get when Chorus and Reverb are combined together.

This has five parameters:

1.Chorus Level (ChoLv: 0~99)

2.Modulation Frequency (Rate: 0.1~9.9 Hz)

3.Chorus Depth (Depth: 0~99)

4.Reverb Level (RevLv: 0~99)

5.Reverb Time (RevTm: 0.1~9.9 Sec)

2. Delay related Effects

13:Delay and 15:L-R Delay are the Delay related Effects. They have three parameters:

1.Delay Level (DlyLv: 0~99)

2.Delay Time (DlyTm: 5~995 mSec, also 1.0~1.4 Sec)

3.Feedback Level (FBack:-99~0~99, the negative numerals indicate the reverse phase)

3.Combined Delay/Reverb Effects

14:Delay+Rev and 16:L-R+Rev are the Effects you get when Delay and Reverb are combined together. They have five parameters:

1.Delay Level (DlyLv:0~99)

2.Delay Time (DlyTm: 2~500 mSec)

3.Feedback Level (FBack:-99~0~99, the negative numerals indicate the reverse phase)

4.Reverb Level (RevLv: 0~99)

5.Reverb Time (RevTm: 0.1~9.9 Sec)

6. Flanger related Effect

19:Flange is the Flanger related Effect. This has three parameters:

1.Flange Level (FlaLv: 0~99)

2.Modulation Frequency (Rate: 0.01~0.99 Hz)

3.Feedback Level (FBack: -99~0~99, the negative numerals indicate the reverse phase)

7.Combined Flanger/Reverb Effect

20:Fla+Rev is the Effect you get when Flanger and Reverb are combined together.

This has five parameters:

1.Flange Level ( FlaLv: 0~99)

2.Modulation Frequency (Rate: 0.01~0.99 Hz)

3.Feedback Level (FBack: -99~0~99, the negative numerals indicate the reverse phase)

4.Reverb Level (RevLv: 0~99)

5.Reverb Time (RevTm: 0.1~9.9 Sec)

4. Chorus related Effect

17:Chorus is the Chorus related Effect. This has three parameters:

1.Chorus Level (ChoLv: 0~99)

2.Modulation Frequency (Rate: 0.1~9.9 Hz)

3.Chorus Depth (Depth: 0~99)

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model IntroductionSafety Instructions Table of Contents Let’s examine the VM04 in more detail EffectInput Section CH1Buss Section Master SectionEffect Effect SectionNames and Functions Fader Adjust key View Status IndicatorTrim knobs Scene Recall keyBefore Use Remove the insulation paperApplications Application 2 To use as a Mono In/Stereo Out EffecterApplication 8 As a practise aid for your musical instruments Initial Setting Normal Mix Mode Character sectionRotate the Data Encoder Channel Edit ModePAN setting EQ Lo Setting EQ Hi settingRotate the Data Encoder clockwise Effect Send settingEffect POST/PRE setting Effect Mode DelayReverb ChorusOne you want to choose Effect Type settingPress the Exit key to quit the Effect Mode Effect Parameter setting Reverb Level setting Pre-Delay Time settingReverb Time setting High Dump settingEarly Reflection Balance setting Store the setting that you have madeScene Memory Scene StoreScene Recall Press the Enter key after you have named your ScenePress the Scene Recall key Press the Enter keyUseful info Fader Adjust modeScene Direct Recall Press the Effect Type key and Effect Parameter key together Setup ModeFader Fix FdFix Battery Check Other modesSoftware Version Check Channel Fader Recall chRCLMixer Section Input 1Input 3 Converter
Top Page Image Contents