Connections
■Phones/Output Jack
Before connecting headphones or other external equipment, be sure to first turn down the volume settings of the digital drum and the connected equipment. You can then adjust volume to the desired level after connections are complete.
Rear Panel
3
Keyboard amp, guitar amp,etc.
PHONES/OUTPUT Jack
1
Standard plug
White | Red PIN plug |
2LEFT RIGHT
AUX IN or similar terminal
of audio amplifier
Connecting Headphones (1)
Connecting headphones cuts off output from the digital drum’s
Audio Equipment (2)
Connect the digital drum to an audio equipment using a commercially available connecting cord with a standard plug on one end and two PIN plugs on the other end. In this configuration, you normally set the input selector of the audio equipment to the terminal (usually marked AUX IN or something similar) where the cord from the digital drum is connected. See the user documentation that comes with your audio equipment for full details.
Musical Instrument Amplifier (3)
Use a commercially available connecting cord to connect the digital drum to a musical instrument amplifier.
❚NOTE
•Be sure to use a connecting cord that has standard plugs on the ends you connect to the digital drum and amplifier.
Connection Example
To digital drum’s
PHONES/OUTPUT INPUT jack
Standard plug
Keyboard or guitar amp
■Accessories and Options
Use only the accessories and options specified for this digital drum. Use of
Page 11 | 02.10.28, 11:19 | Adobe PageMaker 6.5J/PPC |