Other Settings
This section describes more advanced setting you can use to make drum pad play more enjoyable.
■Using the LIGHTING GUIDE SYSTEM
The LIGHTING GUIDE SYSTEM of your Digital Drum lets you select from among various modes that make drum pad play more enjoyable.
To select the LIGHTING GUIDE SYSTEM mode
1. In any mode, press LIGHT.
Drum animation indicating current LIGHTING GUIDE SYSTEM mode (This example indicates Lesson Mode.)
LIGHTING GUIDE SYSTEM mode selection screen indicator
Flashing dial icon
Current LIGHTING GUIDE SYSTEM mode setting
2. Rotate the dial left or right to cycle through the available LIGHTING GUIDE SYSTEM modes until the one you want is displayed.
•The following describes what each LIGHTING GUIDE SYSTEM mode setting does.
When you want this type of pad lighting: | Select this mode: | ||
Pads flash to let you know which one you must strike next | F1 | : Lesson | |
Pads flash to let you know which one you must strike next, and | F2 | : Dual Light | |
light when you strike them | |||
|
| ||
Pads light whenever you strike them | F3 | : Synchro | |
Pads do not light | F4 | : Off | |
Important!
•Note that the pads themselves do not light and flash. Instead, the rings around the pads do.
3.After you are finished, you can press another button to change to another mode.
Page 18 | 02.10.28, 11:19 | Adobe PageMaker 6.5J/PPC |