Casio LD50 Basic Operations, Getting Ready, Adjusting the Main Volume, Playing the Demo Song

Basic Operations

This section provides the most basic information you need to get your Digital Drum running.

■Getting Ready

To turn power on and off

Slide the POWER switch to turn power on and off.

■Adjusting the Main Volume

The main volume controls overall volume, including non-drum sounds, background drum sounds, the sounds of the four pads, and sound effects.

1. Press the MAIN VOL. button.

Mute icon (Flashes when the MAIN VOL. Setting is “V0: Off.”)

Main volume screen indicator

Drum animation indicating current LIGHTING GUIDE SYSTEM mode (This example indicates Lesson Mode.)

Flashing dial icon

Current main volume setting

2. Rotate the dial left to decrease main volume, or right to increase it.

• You can set the main volume in the range of V0 (mute) to V9. The initial default setting is V7.

3.After you are finished, you can press another button to change to another mode.

■Playing the Demo Song

The demo song provides you with a demonstration of the various capabilities of your Digital Drum.

To start demo song play

1. Press the DEMO button.

•You can stop demo tune play by pressing the DEMO button.

2.To exit the demo song, press START/STOP.

•The following shows the default settings during demo song play.

Item	Default Setting
Drum Set	A0 : Auto
LIGHTING GUIDE SYSTEM Mode	F2 : Dual Light
Play Level	L0 : Off

E-14 272A-E-016A

LD50_E_14-22.p65 Page 14 02.10.28, 11:19 Adobe PageMaker 6.5J/PPC