Casio LD50 manual Using Rhythms, Selecting a Rhythm, Adjusting Rhythm Volume, To select a rhythm

Using Rhythms

This section explains how to select rhythms and control their playback.

■Selecting a Rhythm

Use the following procedure to select from among the 50 rhythm patterns built into your Digital Drum. See “Rhythm and Auto Drum Kit List” on page A-3 for a list of available rhythms.

To select a rhythm

1. Press the RHYTHM button.

Drum animation indicating current LIGHTING GUIDE
SYSTEM mode (This example indicates Lesson Mode.)	Flashing dial icon

Rhythm selection screen indicator

Current rhythm setting

• Note that the rhythm selection screen always appears first whenever you turn on LD-50 power.

2.Rotate the dial left or right to cycle through the available rhythms until the one you want is displayed.

3.After you are finished, you can press another button to change to another mode.

■Adjusting Rhythm Volume

Rhythm volume controls non-drum sounds and background drum sounds. It can be used to enhance the sounds assigned to the four pads and hit sounds.

To adjust rhythm volume

1. Press the RHYTHM VOL. button.

Drum animation indicating current LIGHTING GUIDE
SYSTEM mode (This example indicates Lesson Mode.)	Flashing dial icon
Rhythm volume screen
indicator

Current rhythm volume setting

2. Rotate the dial left to decrease rhythm volume, or right to increase it.

•You can set the rhythm volume in the range of V0 (mute) to V9. The initial default setting is V7.

3.After you are finished, you can press another button to change to another mode.

272A-E-017A E-15

LD50_E_14-22.p65 Page 15 02.10.28, 11:19 Adobe PageMaker 6.5J/PPC