Alesis MIXING CONSOLES manual Bypass, Input Jacks, Output Jacks, Midi in Jack, Midi OUT/THRU Jack

Page 19

SECTION 2

The other half of the MIDI program MAPPING section when in the EDIT mode, the INT. PROG (Internal Program) button selects the internal MIDIVERB III program (from 000 to 199) that will be chosen by the external MIDI program number that is selected by the MIDI PROG button.

When in the PROGRAM mode, this is button 0 of the keypad for selecting a program by directly entering the desired program number.

BYPASS

The BYPASS button bypasses the effects of the MIDIVERB III and supplies only Direct Signal Level to the stereo outputs. When the signal is bypassed, the BYPASS LED will light.

BYPASS is also connected to the Bypass Jack on the rear panel and can be activated by a momentary footswitch.

BACKPANEL

INPUT JACKS

(Left & Right)

Accepts from musical instrument to line level input signals.

Use the Right Input Jack for mono.

OUTPUT JACKS

(Left & Right)

Stereo output of the MIDIVERB III.

Use the Right Output Jack for mono.

MIDI IN JACK

Receives all MIDI information.

MIDI OUT/THRU

JACK

14

Image 19

Contents Alesis Table of Contents Interfacing Midiverb Section Page Page Alesis Midiverb FeaturesIntroduction HOW to USE this Manual Editing Programs Factory ProgramsSelecting Programs Please NoteComparing AN Edited to a Stored Program Quick Start Saving Storing Edited Programs Description of Controls Front Panel Edit ValueProgram StoreCHORUS/3 DELAY/2MIDI/8 CONFIG/6MIX/5 MOD/7Midi PROG/9 Midi MappingINT. PROG/0 Midi in Jack BypassInput Jacks Output JacksMidiverb III Front and Back Panels PowerBypass Jack Section Mono Connection to Instrument or Microphone Interfacing MidiverbInstruments Microphones Mono OperationInterfacing VIA AUX Sends Mixing ConsolesStereo Connection to Mixing Console VIA AUX Sends Connection to Console VIA Insert Patch Points Interfacing VIA Insert Send ReturnsStereo Connection to the Console Main Outputs Connection to the Main OutputsPlease NOTEFor With Value Buttons Selecting a ProgramFrom Midi With KeypadEditing a Program PonRo1 FunctionsReverb Algorithm ReverbReverb Algorithms Chorus DelayDisplay What is CHORUS?What is FLANGING? Chorus Algorithm Flanging AlgorithmFrequency Selections Chorus SpeedEffect EQ Delay Output LevelMIX Parameters Input EQMOD Routing MOD ParametersMOD Controller Sources Midiverb III Midi Parameter Targets Midi Controller SourcesMOD Controller Modulated Midiverb III MOD Routing DisplayConfiguration Signal Paths ConfigurationsMOD Amplitude Using Midiverb Reverb Individual ConfigurationsConfiguration Signal Paths Output PRE-DELAYUsing Midiverb Chorus Effects Possibilities ConfigurationDelay Level Algorithm Decay EQ Reverb Input MIX Output Configuration Chorus Delay Chorus Configuration Routed to Effects only EQd Chorused Delay 123 To Change Midi Channels Using Midiverb III with Midi Midi ParametersMidi Channel Selecting Midi Program Change Midi Program ChangeMidi Echo Section Midi Send Selecting Midi EchoTransmitting Programs VIA Midi Midi Mapping Receiving Programs VIA MidiMidi Prog HOW to USE Midi MappingINT. Prog 033 Using Midiverb Initializing the Midiverb Miscellaneous FunctionsDetermining the Current Software Version Specifications Specifications Weight