Alesis MIXING CONSOLES manual With Keypad, From Midi

USING MIDIVERB III

023

Note that the front panel still displays the following:

—The PROGRAM LED will be lit, indicating that the MIDIVERBIII is in the Program mode.

—The display will read the program number, only now it reads "023".

WITH KEYPAD

Another way to select program 23 would be to use the ten function keys on the right of the front panel which double as a keypad in the Program mode (notice the numbers beside each button). To do this we would do the following:

1)Select the three digits (all programs must have 3 digits) from the keypad. In this case 0 (INT. PROG button), 2 (DELAY button), 3 (CHORUS button).

The program will be selected after the third digit is entered.

2)The three digits must be selected within 4 seconds or the program will revert back to the previous program number.

023

After the third digit is entered, the display will read as above.

FROM MIDI

The third and final way to select program 23 is with a program change command received via MIDI.

1)Enable MIDI Program Change by first pressing the EDIT button.

2)Press the MIDI button until the display reads "Pof" or "Pon".

23