Alesis MIXING CONSOLES manual Miscellaneous Functions, Initializing the Midiverb

SECTION 4

MISCELLANEOUS FUNCTIONS

INITIALIZING THE MIDIVERB III

There are two reasons why you may want to reinitialize your

MIDIVERB III :

1)To return all programs to their factory parameter settings (called "initializing").

2)In case the unit locks up from a power surge.

To initialize your MIDIVERB III, do the following:

1)Turn the MIDIVERB III off.

2)Hold the INT. PROG and STORE buttons.

3)Turn the MIDIVERB III on again while holding the above buttons.

---

PLEASE NOTE:

—This procedure will erase all user stored parameters and return all MIDIVERB III parameters to their default values.

—The MIDI program table will return to 000 through 199.

—Programs 100 through 199 will become duplicates of factory programs 000 through 099.

—The display will be blank for about ten seconds while the memory is initialized.

CAUTION: This procedure will erase all user programs from memory!!

54