Alesis MIXING CONSOLES manual Delay, Chorus

Page 32

USING MIDIVERB III

REVERB DECAY

The Reverb Decay determines the length of time that the Reverb will sound before it finally fades away. It is not used in the Reverse 1 and 2 Algorithms. It is functional in all others.

DELAY

The Delay section of the MIDIVERB III can be used in two modes, depending upon the configuration. In some configurations, the Delay acts as a straight mono Digital Delay which can be programmed for up to 490 milliseconds. In other configurations that feature the Reverb of MIDIVERB III , it will be used as a Pre-Delay for the Reverb section with a maximum setting of up to 100 milliseconds.

The programmable parameters are:

DELAY TIME

Delay Time is the amount of time between the original signal and the first repeat, or echo, of the signal.

DELAY REGENERATION

Delay Regeneration means that a portion of the delay signal output is "fed back" into the input, resulting in the delay repeating itself. The more regeneration, the more repeats.

CHORUS

The Chorus section of the MIDIVERB III is primarily used to slightly change the pitch of the signal fed into the unit. This is done to make the input signal thicker and bigger sounding.

The programmable parameters are:

CHORUS

ALGORITHM

27

Image 32

Contents Alesis Table of Contents Interfacing Midiverb Section Page Page Features Alesis MidiverbIntroduction HOW to USE this Manual Factory Programs Selecting ProgramsPlease Note Editing ProgramsComparing AN Edited to a Stored Program Quick Start Saving Storing Edited Programs Description of Controls Front Panel Value ProgramStore EditDELAY/2 CHORUS/3CONFIG/6 MIX/5MOD/7 MIDI/8INT. PROG/0 Midi MappingMidi PROG/9 Bypass Input JacksOutput Jacks Midi in JackBypass Jack PowerMidiverb III Front and Back Panels Section Interfacing Midiverb Instruments MicrophonesMono Operation Mono Connection to Instrument or MicrophoneStereo Connection to Mixing Console VIA AUX Sends Mixing ConsolesInterfacing VIA AUX Sends Interfacing VIA Insert Send Returns Connection to Console VIA Insert Patch PointsConnection to the Main Outputs Stereo Connection to the Console Main OutputsPlease NOTEFor Selecting a Program With Value ButtonsWith Keypad From MidiPon Editing a ProgramFunctions Ro1Reverb Algorithms ReverbReverb Algorithm Delay ChorusWhat is CHORUS? What is FLANGING?Chorus Algorithm Flanging Algorithm DisplayChorus Speed Frequency SelectionsDelay Output Level MIX ParametersInput EQ Effect EQMOD Controller Sources MOD ParametersMOD Routing Midi Controller Sources Midiverb III Midi Parameter TargetsMidiverb III MOD Routing Display MOD Controller ModulatedMOD Amplitude ConfigurationsConfiguration Signal Paths Using Midiverb Individual Configurations ConfigurationSignal Paths Output PRE-DELAY ReverbUsing Midiverb Configuration Chorus Effects PossibilitiesDelay Level Algorithm Decay EQ Reverb Input MIX Output Configuration Chorus Delay Chorus Configuration Routed to Effects only EQd Chorused Delay 123 Midi Channel Using Midiverb III with Midi Midi ParametersTo Change Midi Channels Midi Echo Midi Program ChangeSelecting Midi Program Change Section Transmitting Programs VIA Midi Selecting Midi EchoMidi Send Receiving Programs VIA Midi Midi MappingINT. Prog HOW to USE Midi MappingMidi Prog 033 Using Midiverb Miscellaneous Functions Initializing the MidiverbDetermining the Current Software Version Specifications Specifications Weight