3.2 The Front Panel
REVERSE HOLD
SMOOTH SHARP
CROSSFADER
CURVE
MIC IN | PHONE OUT | REVERSE TAP |
23 | 24 | 25 | 26 |
3.2.1 MIC IN Jack | 23 |
This input will accept and unbalanced low impedance microphone. The functions of the microphone will be controlled by the MIC INPUT section on the Top Panel.
3.2.2 The PHONE OUT Jack | 24 |
This input will accept a standard headphone with a 1/4" stereo jack
3.2.3 The REVERSE Switch | 25 |
This switch will invert the direction of the crossfader so that an immediate inversion of the two channels will be achieved. This switch has two functions: TAP and HOLD.
In TAP function the 2 channels will be reversed instantly and will go back in their original set as soon as you release the switch in center position
In HOLD function the two channels will be locked in the reverse position. To cancel the effect you will need to push back the switch in the center position.
3.2.4 CROSSFADER CURVE Control | 26 |
Via this knob you will adjust the crossfader curve. Please see (5) earlier in this Manual for further reference.
9