3.1.3 The MAIN OUT Section |
|
| 9 |
This knob controls the overall output volume.
| 10 |
When you speak through a connected microphone the volume of the reproduced music will be automatically reduced by the mixer for better intelligibility of your voice. You can determine yourself how much the volume of the music will be reduced via this control.
| 11 |
DJ Mixers are often used in quite inappropriate venues and the positioning of the loudspeakers is not always optimal. The Surround Control allow you to get a better transparency and stereo image and will contribute to "clean" you mix.
| 12 |
You can turn off the Surround function via this switch. You can also run fast A/B comparison (with surround/ without surround) via this switch.
3.1.4 The PFL (pre fader level) Section
When you connect a headphone to your DJM 3 you have the chance of
13 |
This knob will adjust the level of the headphone signal.
| 14 |
Set the switch mode (15) in STEREO position and you can fade between channel 1 and 2.
| 15 |
This is a
3.1.5 The LEVEL METER Section
| 16 |
This 10 segments LED's Meter will read the signal selected via the MAIN/PFL switch. Please see following.
| 17 |
When this switch is in MAIN function (main Led on) the Level Meter will display the output level of the Left and Right channels; When this switch is in PFL function (PFL Led on) the Level Meter will display the PFL headphone signal: channel 1 on left Led Meter and Channel 2 on right Led Meter.
9
10
11
12
13
14
15
17
16
7