Makita TM3000C instruction manual Specifications, English Original instructions

Page 2

ENGLISH (Original instructions)

SPECIFICATIONS

Model

TM3000C

Oscillation per minute

6,000 - 20,000/min

Oscillation angle, left/right

1.6 (3.2 total)

Overall length

275 mm (10-7/8")

Net weight

1.4 kg (3.2 lbs.)

Due to our continuing program of research and development, the specifications herein are subject to change without notice.

Specifications may differ from country to country.

Weight according to EPTA-Procedure 01/2003

GEA008-2

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords

increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

9.If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal Safety

10.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

11.Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

12.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. . Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

13.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

14.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

15.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

2

Image 2
Contents Multi Tool Outil Multi-Fonctions Multitool Specifications English Original instructionsMulti Tool Safety Leaves it unstable and may lead to loss of control Adjusting the orbital stroke rate AssemblySwitch action Installing or removing application tool optional accessoryCutting, sawing and scraping OperationSanding Dust extraction attachment optional accessory Warranty Policy MaintenanceOptional Accessories Français Mode d’emploi original SpécificationsPage Intensité nominale Tableau 1. Gabarit minimum du cordonLongueur totale du cordon en pieds 120V 25 pi 50 pi 100 pi 150 pi 220V 200 pi 300 piConservez CE Mode Demploi AvertissementRéglage de la cadence de la coupe orbitale Description DU FonctionnementAssemblage Ponçage UtilisationCouper, scier et raboter Extracteur de poussière accessoire en option Politique de garantie Accessoires EN OptionEntretien Especificaciones Español Instrucciones originalesAccidentalmente Calibre del cable AWG 10 a 12 a 16 a No se recomienda 15,2 m 50 ftMás de Guarde Estas Instrucciones AdvertenciaAccionamiento del interruptor Descripción DEL FuncionamientoEnsamble Ajuste de la tasa de ciclo orbitalLijado OperaciónCortado, lijado y raspado Aditamento de boquilla para polvo accesorio opcional Política de garantía MantenimientoAccesorios Opcionales Page Page Page Advertencia

TM3000C specifications

The Makita TM3000C is a versatile and powerful multi-tool that has gained significant attention for its exceptional performance and innovative features. Designed for both professionals and DIY enthusiasts, this tool is engineered to handle a wide range of applications, making it a must-have in any tool kit.

One of the standout features of the TM3000C is its powerful 3.0 AMP motor, which provides effective performance across various cutting, sanding, and grinding tasks. With a no-load speed of up to 20,000 oscillations per minute, users benefit from rapid results and efficiency in their projects. This high-speed capability allows for precision in detailed work, ensuring clean cuts and smooth finishes.

This multi-tool incorporates the proprietary Tool-less accessory change system, which allows users to switch between different attachments quickly and easily without the need for additional tools. The 12-speed settings further enhance versatility, allowing users to adjust the oscillation speed to suit the specific requirements of different materials, whether it be wood, metal, drywall, or other surfaces.

Another key characteristic of the TM3000C is its ergonomic design, which prioritizes user comfort. The slim body and soft grip handle reduce fatigue during extended periods of use, enabling users to maintain better control and precision. Additionally, the tool is lightweight, making it easier to maneuver even in tight spaces.

The TM3000C is also equipped with an innovative anti-restart function, promoting safety by preventing accidental start-ups after power interruptions. This feature, combined with an electronic speed control, enhances the overall user experience by providing consistent performance and minimizing the risk of accidents.

Moreover, the compatibility of the TM3000C with a wide range of accessories available in the market expands its utility further, making it adaptable for various tasks, from scraping and sanding to cutting and polishing. The tool's extensive capabilities make it suitable for home improvement projects, renovations, and professional construction work alike.

In summary, the Makita TM3000C stands out as a reliable, efficient, and user-friendly multi-tool. Its powerful motor, versatile speed settings, ergonomic design, and safety features make it an excellent choice for anyone looking to tackle diverse tasks with ease and precision. Whether you are a seasoned professional or a DIY enthusiast, the TM3000C is undoubtedly a valuable addition to your toolkit.