Makita TM3000C instruction manual Leaves it unstable and may lead to loss of control

Page 4

leaves it unstable and may lead to loss of control.

4.Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.

5.Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses.

6.Avoid cutting nails. Inspect workpiece for any nails and remove them before operation.

7.Hold the tool firmly.

8.Make sure the application tool is not contacting the workpiece before the switch is turned on.

9.Keep hands away from moving parts.

10.Do not leave the tool running. Operate the tool only when hand-held.

11.Always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece.

12.Do not touch the application tool or the workpiece immediately after operation; they may be extremely hot and could burn your skin.

13.Do not operate the tool at no-load unnecessarily.

14.Always use the correct dust mask/respirator for the material and application you are working with.

15.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.

16.This tool has not been waterproofed, so do not use water on the workpiece surface.

17.Ventilate your work area adequately when you perform sanding operations.

18.Use of this tool to sand some products, e.g. leaded paint surfaces, wood and metals could expose user and bystanders to dust containing hazardous substances. Use appropriate respiratory protection.

19.Be sure that there are no cracks or breakage on the pad before use. Cracks or breakage may cause a personal injury.

20.Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.

21.Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear hearing protectors, gloves and workshop apron capable of stopping

small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations . The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss.

22.Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.

23.Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control.

24.Do not run the power tool while carrying it at your side. Accidental contact with the accessory could snag your clothing, pulling the accessory into your body.

25.Do not operate the power tool near flammable materials. Sparks could ignite these materials.

26.Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

27.Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

28.If working place is extremely hot and humid, or badly polluted by conductive dust, use a short-circuit breaker (30 mA) to assure operator safety.

29.Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

4

Image 4
Contents Multi Tool Outil Multi-Fonctions Multitool Specifications English Original instructionsMulti Tool Safety Leaves it unstable and may lead to loss of control Assembly Switch actionAdjusting the orbital stroke rate Installing or removing application tool optional accessorySanding OperationCutting, sawing and scraping Dust extraction attachment optional accessory Optional Accessories MaintenanceWarranty Policy Français Mode d’emploi original SpécificationsPage Tableau 1. Gabarit minimum du cordon Longueur totale du cordon en piedsIntensité nominale 120V 25 pi 50 pi 100 pi 150 pi 220V 200 pi 300 piConservez CE Mode Demploi AvertissementAssemblage Description DU FonctionnementRéglage de la cadence de la coupe orbitale Couper, scier et raboter UtilisationPonçage Extracteur de poussière accessoire en option Entretien Accessoires EN OptionPolitique de garantie Especificaciones Español Instrucciones originalesAccidentalmente Más de 15,2 m 50 ftCalibre del cable AWG 10 a 12 a 16 a No se recomienda Guarde Estas Instrucciones AdvertenciaDescripción DEL Funcionamiento EnsambleAccionamiento del interruptor Ajuste de la tasa de ciclo orbitalCortado, lijado y raspado OperaciónLijado Aditamento de boquilla para polvo accesorio opcional Accesorios Opcionales MantenimientoPolítica de garantía Page Page Page Advertencia

TM3000C specifications

The Makita TM3000C is a versatile and powerful multi-tool that has gained significant attention for its exceptional performance and innovative features. Designed for both professionals and DIY enthusiasts, this tool is engineered to handle a wide range of applications, making it a must-have in any tool kit.

One of the standout features of the TM3000C is its powerful 3.0 AMP motor, which provides effective performance across various cutting, sanding, and grinding tasks. With a no-load speed of up to 20,000 oscillations per minute, users benefit from rapid results and efficiency in their projects. This high-speed capability allows for precision in detailed work, ensuring clean cuts and smooth finishes.

This multi-tool incorporates the proprietary Tool-less accessory change system, which allows users to switch between different attachments quickly and easily without the need for additional tools. The 12-speed settings further enhance versatility, allowing users to adjust the oscillation speed to suit the specific requirements of different materials, whether it be wood, metal, drywall, or other surfaces.

Another key characteristic of the TM3000C is its ergonomic design, which prioritizes user comfort. The slim body and soft grip handle reduce fatigue during extended periods of use, enabling users to maintain better control and precision. Additionally, the tool is lightweight, making it easier to maneuver even in tight spaces.

The TM3000C is also equipped with an innovative anti-restart function, promoting safety by preventing accidental start-ups after power interruptions. This feature, combined with an electronic speed control, enhances the overall user experience by providing consistent performance and minimizing the risk of accidents.

Moreover, the compatibility of the TM3000C with a wide range of accessories available in the market expands its utility further, making it adaptable for various tasks, from scraping and sanding to cutting and polishing. The tool's extensive capabilities make it suitable for home improvement projects, renovations, and professional construction work alike.

In summary, the Makita TM3000C stands out as a reliable, efficient, and user-friendly multi-tool. Its powerful motor, versatile speed settings, ergonomic design, and safety features make it an excellent choice for anyone looking to tackle diverse tasks with ease and precision. Whether you are a seasoned professional or a DIY enthusiast, the TM3000C is undoubtedly a valuable addition to your toolkit.