Multi Tool Safety

16.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Power tool use and care

17.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

18.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

19.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

20.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

21.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

22.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

23.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions

and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Service

24.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

25.Follow instruction for lubricating and changing accessories.

26.Keep handles dry, clean and free from oil and grease.

USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Table 1: Minimum gage for cord

	Volts		Total length of cord in feet

Ampere Rating	120V	25 ft.	50 ft.	100 ft.	150 ft.

	220V - 240V	50 ft.	100 ft.	200 ft.	300 ft.
More Than	Not More Than		AWG
0	6	18	16	16	14
6	10	18	16	14	12
10	12	16	16	14	12
12	16	14	12	Not Recommended
000300

GEB096-3

WARNINGS

1.This power tool is intended to function for sawing, cutting, grinding and sanding. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

2.Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

3.Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body

TM3000C specifications

The Makita TM3000C is a versatile and powerful multi-tool that has gained significant attention for its exceptional performance and innovative features. Designed for both professionals and DIY enthusiasts, this tool is engineered to handle a wide range of applications, making it a must-have in any tool kit.

One of the standout features of the TM3000C is its powerful 3.0 AMP motor, which provides effective performance across various cutting, sanding, and grinding tasks. With a no-load speed of up to 20,000 oscillations per minute, users benefit from rapid results and efficiency in their projects. This high-speed capability allows for precision in detailed work, ensuring clean cuts and smooth finishes.

This multi-tool incorporates the proprietary Tool-less accessory change system, which allows users to switch between different attachments quickly and easily without the need for additional tools. The 12-speed settings further enhance versatility, allowing users to adjust the oscillation speed to suit the specific requirements of different materials, whether it be wood, metal, drywall, or other surfaces.

Another key characteristic of the TM3000C is its ergonomic design, which prioritizes user comfort. The slim body and soft grip handle reduce fatigue during extended periods of use, enabling users to maintain better control and precision. Additionally, the tool is lightweight, making it easier to maneuver even in tight spaces.

The TM3000C is also equipped with an innovative anti-restart function, promoting safety by preventing accidental start-ups after power interruptions. This feature, combined with an electronic speed control, enhances the overall user experience by providing consistent performance and minimizing the risk of accidents.

Moreover, the compatibility of the TM3000C with a wide range of accessories available in the market expands its utility further, making it adaptable for various tasks, from scraping and sanding to cutting and polishing. The tool's extensive capabilities make it suitable for home improvement projects, renovations, and professional construction work alike.

In summary, the Makita TM3000C stands out as a reliable, efficient, and user-friendly multi-tool. Its powerful motor, versatile speed settings, ergonomic design, and safety features make it an excellent choice for anyone looking to tackle diverse tasks with ease and precision. Whether you are a seasoned professional or a DIY enthusiast, the TM3000C is undoubtedly a valuable addition to your toolkit.