Intel SC5000 manual Install Rails, Installing the Handles

Page 27

Install Rails

1. Using two screws for each handle, attach the handles to the chassis.

OM09375

Figure 18. Installing the Handles

2.Fully extend the rails.

3.Remove the smallest rail.

4.Position the rail

5.Insert and tighten four screws.

B

B

A B

B

OM09377

Figure 19. Attaching the Rail to the Chassis

A.Rail

B.Screw locations

6.Install the rest of the rail in your rack.

Rack Installation Procedures

27

Image 27
Contents SC5000 Rack Kit Installation Guide Disclaimer Contents SC5000 Rack Kit Installation Guide Server Precautions Safety GuidelinesEquipment Rack Precautions Safety Guidelines SC5000 Rack Kit Installation Guide Kit Contents Rack Installation ProceduresRemoving the Feet Remove FeetRemoving the Cover Remove Top CoverRemoving a 5 ¼-inch Device Remove 5 ¼-Inch DevicesRemoving Slide Rails Remove Door Removing the Hinge PinsRemoving the Hinge Plate Removing the Bezel Remove BezelRemoving the EMI Covers Remove EMI CoversRemoving the Right Side Cover Remove Right Side CoverInstalling the Right Side Cover Install Right Side CoverInstalling 5 ¼-Inch Devices Install 5 ¼-Inch Devices into the Reorientation BracketInstalling the 5 ¼-Inch Reorientation Bracket Install the 5 ¼-Inch Reorientation BracketInstalling the Chassis Intrusion Lock Install BezelInstalling the Bezel Installing the Screw Plate Install Screw PlateInstalling the Front Cover Install Front CoverInstalling the Top Cover Install Top CoverInstalling the Handles Install RailsRails Installed in a Rack SC5000 Šb ± ¿ ¼ Ã\ SC5000 ä ›‹XTé,!·K ˇX ESD ¼ã ˝ Kä SC5000 ä ›äc ⁄U¸‘˛ƒfi 5PbÍ ‚‘„è »Uı ¯˛éÒ,3W¿ ¯˛éÒ,3W¿ BƒÍ NØ˛éÒ,3W¿ ⁄ı5« ⁄ EMI ın¯˛éÒ±,3W¿ Âfi$ ›fl$ LflEMI ˛éÒ Œn ‘G’ ¸+‘⁄’\ü‹ ‚Õö ˚ö XØ˛éÒ ˚¤ªéÒ ⁄¯˛éÒ ⁄›-G» Œn-X ¶9JØ˛éÒ 21. Kcä