Stanley Black & Decker MHP3 user manual Quick Disconnect Couplers, Operating the Tool Circuit

Page 13

OPERATION

RECOMMENDED HYDRAULIC OILS Below is a list of recommended oils by brand.

Brand

Biodegradable

Description

CITGO

No

Hydurance AW32

AMS Oil

No

HVH 32

Exxon Mobil

No

Univis HVI26*

Exxon Mobil

No

DTE 10 Excel

Shell

No

S2 V 32

Chevron

No

Rando HDZ 32

Conoco Phillips

No

Unax AW-WR-32

Clarion (CITGO)

Yes

Green Bio 32

Exxon Mobil

Yes

EAL 224H

Chevron

Yes

Clarity AW32

Terresolve

Yes

Envirologic 132

Shell

Yes

Naturelle HF-E-32

*Recommended for extreme cold temperatures

QUICK DISCONNECT COUPLERS

HTMA-approved quick-disconnect couplings are in- stalled to hydraulic hoses so that the direction of oil flow is always from the male to the female quick disconnect as shown on page 10. Quick disconnect couplings and hose fittings are selected so that additional fittings such as reducer or adapter fittings are not required.

If adapter fittings are used, they must be approved steel hydraulic fittings meeting a minimum operating pressure rating of 2500 psi/172 bar. Do not use galvanized pipe fittings or black pipe fittings.

Use thread tape or pipe joint compound when installing quick disconnect couplings to hose or tool fittings. Fol- low the instructions furnished with the selected thread sealant. DO NOT OVERTIGHTEN THE FITTINGS.

OPERATING THE TOOL CIRCUIT

Facing the panel, the male quick disconnect fittings are the PRESSURE FLUID OUT fitting. The female quick disconnect fittings are the RETURN FLUID IN (RE- TURN) fitting.

PRESSURE (OUT)

RETURN (IN)

The “Dual Circuit” control panel contains connections for two 5 GPM tool circuits. In addition, the two circuits may be combined into one 10 GPM tool circuit.

1.If using one 5 GPM tool circuit, select either the up- per or lower circuit and connect the PRESSURE

FLUID OUT hose to the male coupler and connect the RETURN FLUID IN (RETURN) to the female coupler next to it. Connect the other ends of the hoses to the tool.

If using both 5 GPM tool circuits, connect PRES- SURE FLUID OUT hoses to the male couplers and connect the RETURN FLUID IN (RETURN) hoses to the female couplers. Connect the other ends of the hoses to the tools.

NOTE:

Before starting the engine make sure the tool circuit switches are in the OFF position.

The power unit will not start if the tool selector switches are not in the OFF position.

2.Ensure the throttle control is pulled fully back to the idle position.

3.Ensure the tool circuit switches are in the OFF posi- tion.

4.Pull the choke out until it stops.

MHP3 User Manual ◄ 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents TracHorse Page Table of Contents Local Safety Regulations Safety SymbolsDo not Operate the Trachorse in EN Safety PrecautionsSafety Precautions Tool Stickers & Tags Hose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsInch ID HOSE, 25 FT to 50 FT Long Hose & Fitting ConnectionsOperation PRE Operation ProceduresOperating the Tool Circuit Quick Disconnect CouplersShutdown Cold Weather StartupDual Circuit Combined for 10 GPM Reverse Travel Forward TravelSlope Operation Traveling Forward or ReverseForward Travel Turning From a Stop Loading and UnloadingEngine Maintenance Routine MaintenanceHydraulic System Maintenance LiftingFilling the Reservoir Adjusting Track TensionRemoving Condensed Moisture from Hydraulic Fluid Checking Suction HoseProblem Cause Solution TroubleshootingMIX OLD Style Tank and CAP with NEW Style Tank and CAP Fuel TankAccessories SpecificationsFilters Adjusting Track Tension QTY Description MHP3 Parts List MHP3 Parts LIST-MAJOR AssemblyMHP3 Parts Illustration Hose & Fitting Illustration MHP3 Parts List MHP3 Parts LIST-HOSE & Fitting MHP3 Parts Illustration MHP3 Electric Wiring Schematic Coupler SET GTR20H12 22 MHP3 Parts MHP3 Honda Engine IllustrationMHP3 Parts List MHP3 Honda Engine Parts List
Related manuals
Manual 34 pages 1.96 Kb

MHP3 specifications

Stanley Black & Decker has long been a leader in the tools and hardware industry, and their MHP3 model exemplifies the brand's commitment to innovation and quality. The MHP3 is a multi-use power tool, expertly designed to meet the rigorous demands of both professionals and DIY enthusiasts alike.

One of the standout features of the MHP3 is its powerful motor, delivering robust performance for a variety of tasks. With variable speed control, users can easily adjust the tool's power to suit specific applications, ensuring optimal results whether drilling, fastened, or cutting. The ergonomic design of the MHP3 ensures a comfortable grip, reducing fatigue during prolonged use.

The MHP3 incorporates advanced cordless technology, which adds a layer of convenience and mobility for users. Powered by a high-capacity lithium-ion battery, it offers extended run times and can be charged quickly, allowing for minimal downtime on jobs. The battery life indicator is a thoughtful addition, helping users monitor remaining power and plan their tasks accordingly.

Another remarkable characteristic of the MHP3 is its versatility. It comes with interchangeable attachments, allowing users to tackle a multitude of projects without needing multiple tools. This adaptability makes it a favorite among professionals who require a reliable tool that can efficiently manage different jobs on-site. The tool's compatibility with a wide array of accessories further enhances its functionality.

Safety features are paramount in tool design, and Stanley Black & Decker has ensured that the MHP3 is equipped with several. The integrated safety switch prevents accidental startups, while the durable outer casing protects internal components from damage during rigorous use.

In addition to its functional capabilities, the MHP3 is also designed with aesthetics in mind. With a modern and sleek profile, it fits well in any tool collection while being practical for everyday use.

Overall, the Stanley Black & Decker MHP3 stands out as a comprehensive power tool solution. Its combination of power, versatility, and safety features makes it an indispensable addition to any workshop or job site, embodying the brand's commitment to delivering quality tools that meet the needs of consumers across various sectors. Whether you're a seasoned professional or just starting on home improvement projects, the MHP3 is engineered to deliver outstanding performance and reliability.
Top Page Image Contents