Stanley Black & Decker MHP3 user manual Loading and Unloading, Turning From a Stop

OPERATION

TO TURN LEFT WHILE MOVING BACKWARD: Re- lease the left track control while pulling backward on the right track control. Resume pulling backward on the left track control to move backward in a straight line.

TO TURN LEFT WHILE

MOVING BACKWARD

Release left control while

holding right control

backward

TO TURN RIGHT WHILE MOVING BACKWARD: Re- lease the right track control while pulling backward on the left track control. Resume pulling backward on the right track control to move backward in a straight line.

TO TURN RIGHT WHILE

MOVING BACKWARD

Release right control

while holding left control

backward

Turning From A Stop

TO TURN LEFT FROM A STOP: Move the right track control forward moving the left track control backward. At the same time will increase the turning rate.

TO TURN LEFT

FROM A STOP Move the right control forward and the left control backward

TO TURN RIGHT FROM A STOP: Move the left track control forward moving the right track control backward. At the same time will increase the turning rate.

TO TURN RIGHT

FROM A STOP Move the left control forward and the right control backward

LOADING AND UNLOADING

1.Use loading ramps or a loading dock to load and un- load the machine. Ensure loading ramps are strong enough to support the load. When using ramps, do not exceed a 15 degree incline (27 percent).

MHP3 User Manual ◄ 17