Stanley Black & Decker Essential Safety Guidelines for Your Stanley Trachorse
Page 5

SAFETY PRECAUTIONS

Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the machine.

These safety precautions are given for your safety. Re- view them carefully before operating the machine and before performing general maintenance or routine ser- vice.

Supervising personnel should develop additional pre- cautions relating to the specific work area and local safety regulations. If so, place the added precautions in the space provided in this manual.

If you have not read this manual or the engine manu- al, you are not ready to operate the MHP3. Read and understand this manual and any stickers and tags attached to the machine before operation. Failure to do so can result in equipment damage, personal in- jury, or death.

•Operate the machine in a work area WITHOUT BY- STANDERS. The operator must be familiar with all prohibited work areas such as excessive slopes and dangerous terrain conditions.

•DO NOT operate the machine ACROSS excessive slopes or unstable terrain where “tip over” is a hazard.

•DO NOT operate the machine in confined areas where there may be a risk of crushing the operator between the machine and another object.

•DO NOT OPERATE THE TRACHORSE IN EN-

CLOSED SPACES. Inhalation of engine exhaust can be fatal.

•DO NOT WEAR LOOSE CLOTHING that can get entangled in the working parts of the machine or hy- draulic tools.

•DO NOT add fuel to the machine while it is running or still hot.

•DO NOT operate the machine if a fuel odor is pres- ent.

•DO NOT operate the machine within 3.3 ft./1 m of buildings, obstructions, or flammable objects.

•Allow the engine to cool before storing the machine in an enclosure.

•DO NOT RIDE ON, OR ALLOW ANYONE ELSE TO

RIDE ON, THE MACHINE AT ANY TIME.

•Establish a training program for all operators to en- sure safe operation.

•DO NOT operate the machine unless thoroughly trained or under the supervision of an instructor.

•Always wear safety equipment such as goggles, ear, head protection, respiratory and safety shoes at all times when operating the TracHorse and hy- draulic tools.

•DO NOT inspect or clean the machine while the en- gine is running. Accidental engagement of the ma- chine can cause serious injury or death.

•Wear a homologated respirator when cutting or breaking masonry, concrete, asbestos and other materials that produce dust.

•The hydraulic circuit control switch must be in the “OFF”position when coupling or uncoupling hydrau- lic tools. Wipe all couplers clean before connecting.

Use only lint-free cloths. Failure to do so may result in damage to the quick couplers and cause over- heating of the hydraulic system.

•Before operating hydraulic tools, read and under- stand the operation manual furnished with the tool.

•DO NOT operate a damaged, or improperly adjust- ed, machine. DO NOT operate with guards removed.

•DO NOT weld or cut with an acetylene torch any surface or component of the equipment. Consult with the Stanley factory before performing any weld- ing or acetylene cutting of the equipment.

•Prevent possible personal injury or equipment dam- age by having all repair, maintenance and service performed only by authorized and properly trained personnel.

•DO NOT exceed the rated limits of the equipment or use the equipment for applications beyond its de- sign capacity.

•Always keep critical markings, such as labels and warning stickers legible.

•Always replace parts with replacement parts recom- mended by Stanley Hydraulic Tools.

•Keep all body parts away from working parts of the TracHorse.

•Be aware of surrounding hazards. Noise created by the TracHorse and the tools it operates may mask early indications of approaching hazards.

•Only use the TracHorse in well-ventilated areas. DO NOT operate in explosive atmospheres, in closed environments or near flammable substances.

MHP3 User Manual 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents TracHorse Page Table of Contents Local Safety Regulations Safety SymbolsDo not Operate the Trachorse in EN Safety PrecautionsSafety Precautions Tool Stickers & Tags Hose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsInch ID HOSE, 25 FT to 50 FT Long Hose & Fitting ConnectionsOperation PRE Operation ProceduresOperating the Tool Circuit Quick Disconnect CouplersDual Circuit Combined for 10 GPM Cold Weather StartupShutdown Reverse Travel Forward TravelSlope Operation Traveling Forward or ReverseForward Travel Turning From a Stop Loading and UnloadingEngine Maintenance Routine MaintenanceHydraulic System Maintenance LiftingFilling the Reservoir Adjusting Track TensionRemoving Condensed Moisture from Hydraulic Fluid Checking Suction HoseProblem Cause Solution TroubleshootingMIX OLD Style Tank and CAP with NEW Style Tank and CAP Fuel TankFilters SpecificationsAccessories Adjusting Track Tension QTY Description MHP3 Parts List MHP3 Parts LIST-MAJOR AssemblyMHP3 Parts Illustration Hose & Fitting Illustration MHP3 Parts List MHP3 Parts LIST-HOSE & Fitting MHP3 Parts Illustration MHP3 Electric Wiring Schematic Coupler SET GTR20H12 22 MHP3 Parts MHP3 Honda Engine IllustrationMHP3 Parts List MHP3 Honda Engine Parts List
Related manuals
Manual 34 pages 1.96 Kb

MHP3 specifications

Stanley Black & Decker has long been a leader in the tools and hardware industry, and their MHP3 model exemplifies the brand's commitment to innovation and quality. The MHP3 is a multi-use power tool, expertly designed to meet the rigorous demands of both professionals and DIY enthusiasts alike.

One of the standout features of the MHP3 is its powerful motor, delivering robust performance for a variety of tasks. With variable speed control, users can easily adjust the tool's power to suit specific applications, ensuring optimal results whether drilling, fastened, or cutting. The ergonomic design of the MHP3 ensures a comfortable grip, reducing fatigue during prolonged use.

The MHP3 incorporates advanced cordless technology, which adds a layer of convenience and mobility for users. Powered by a high-capacity lithium-ion battery, it offers extended run times and can be charged quickly, allowing for minimal downtime on jobs. The battery life indicator is a thoughtful addition, helping users monitor remaining power and plan their tasks accordingly.

Another remarkable characteristic of the MHP3 is its versatility. It comes with interchangeable attachments, allowing users to tackle a multitude of projects without needing multiple tools. This adaptability makes it a favorite among professionals who require a reliable tool that can efficiently manage different jobs on-site. The tool's compatibility with a wide array of accessories further enhances its functionality.

Safety features are paramount in tool design, and Stanley Black & Decker has ensured that the MHP3 is equipped with several. The integrated safety switch prevents accidental startups, while the durable outer casing protects internal components from damage during rigorous use.

In addition to its functional capabilities, the MHP3 is also designed with aesthetics in mind. With a modern and sleek profile, it fits well in any tool collection while being practical for everyday use.

Overall, the Stanley Black & Decker MHP3 stands out as a comprehensive power tool solution. Its combination of power, versatility, and safety features makes it an indispensable addition to any workshop or job site, embodying the brand's commitment to delivering quality tools that meet the needs of consumers across various sectors. Whether you're a seasoned professional or just starting on home improvement projects, the MHP3 is engineered to deliver outstanding performance and reliability.
Top Page Image Contents