FOOTSWITCH CONTROL
Now that we have the basics down, let's investigate some live performance options using footswitch control. This is particularly useful if you're playing along with Patterns and Songs on the pads and can't use your hands to punch buttons.
There are two jacks for footswitches (Start/Stop and Count/A/B/Fill). Always plug these footswitches in before turning on power. Either normally open or normally closed types (the two most common footswitch types) can be used; the SR18 determines which kind is in use during
Here's how to use the footswitches:
SET TEMPO
The SR18 must be stopped. Before playing a Song or Pattern, tap the Count/A/B/Fill jack footswitch several times at the desired tempo. The SR18 will average the time between taps and derive a tempo, the display will update the tempo with each tap. Tapping the TAP TEMPO button accomplishes the same result as tapping the Count/A/B/Fill footswitch.
START A SONG OR PATTERN
When the SR18 is stopped, pressing the Start/Stop footswitch is equivalent to pressing PLAY. When the SR18 is running, pressing the Start/Stop footswitch is equivalent to pressing STOP.
INITIATE A FILL WHEN PLAYING PATTERNS
When playing patterns, the Count/A/B/Fill footswitch duplicates the FILL button function.
CANCEL A TRANSITION FROM A TO B, OR B TO A, PATTERNS
When you initiate a Fill, an A Pattern will transition to a B pattern (or
EXTEND A SONG STEP WHEN PLAYING BACK A SONG
During Song playback, pressing and holding the Count/A/B/Fill footswitch until past the end of a Song Step will cause that step to repeat. This is great if the soloist wants to take a few more bars.
ADDITIONAL INFORMATION
For more information, please see the SR18 Reference Manual. Additional information may also be found on www.alesis.com.
For technical support:
EMAIL: support@alesis.com
PHONE:
TECHNICAL SPECIFICATIONS
Main and Aux outputs: | SNR | 94dB |
| THD+N | ~0.004% @ 1.38KHz |
Samples: | 32MB 16 bit, max 44.1kHz sample rate uncompressed PCM | |
Pads: | 12 | |
MIDI: | In, Out/Thru | |
Power: | Input 12VDC 600mA, center pin is ground | |
| 6 AA batteries, 1.5V nominal each | |
Weight: | 2 lbs |
|
Dimensions: | 9.6" x 7.5" x 1.8" |
14