Dimplex BF39ST/DX, BF33ST/DX manual Volt Installation no Heat Installation

Page 8

SECTION C: FACTORY SETTING WIRING (WITHOUT MAIN POWER WALL SWITCH) (NO HEAT INSTALLATION)

IMPORTANT:

The unit is factory configured for 208/240 volt operation

NOTE:

Use 2 conductor wire with ground (3 wires total) from the power supply (breaker panel) to the junction box on the unit.

NOTE:

All wiring must be completed prior to installing the unit.

NOTE:

Ensure that the voltage selector switch is in the proper position for the required supply voltage prior to connecting the unit to the power supply.

120 VOLT INSTALLATION (NO HEAT INSTALLATION)

1.Locate the voltage selector switch inside the exhaust panel on the top right hand corner of the unit. (see figure 2 on page 3)

2.Flip the switch from 240 volt to 120 volt configuration. (230 and 115 is printed on switch)

3.Loosen the screw securing the junction box cover and remove the cover.

4.Remove the knockouts (if necessary) or use the provided cable clamp.

5.Pull out the four wires marked L1, L2, N, and G.

6.Connect the black L1 wire from the unit to the black L1 from the power supply.

7.Install a wire nut on the red L2. (wire nut not included).

8.Connect the white N wire from the unit to the white neutral wire from the power supply.

9.Connect the green ground wire from the unit to the ground from the power supply.

10.When the unit has been configured for the appropriate power supply voltage, ensure that all connections are tight.

11.Insert all the wiring back into the unit and secure with a cable clamp.

BOX

WHITE WIRE - N

 

 

 

JUNCTION

RED WIRE – L2

 

BLACK WIRE – L1

Wire Nut

 

 

FIREPLACE

GREEN WIRE - G

 

 

 

WHITE WIRE - N

BLACK WIRE – L1

GROUND WIRE - G

120V

POWER SUPPLY

(BREAKER

PANEL)

6

Image 8
Contents BF33ST/DX BF39ST/DX BF45ST/DX Contents Listings and Code Approvals Section B Recommended Power Supply Wire Specifications Recommended Wire and Fusing RequirementsVoltage Selector Switch Location Mounting FlangesVolt Installation 120 Volt Installation no Heat Installation Section D Main Power Wall Switch Wiring Options For 240 Volt Volt InstallationsWiring Diagram Main Power Wall Switch Wiring For 120 Volt Fireplace Wall Volt Installations No Heat Installation 120 / 240 Volt Installations For 120/240 VoltDiagram for 120/240 Volt Wall Mounted Thermostat Wiring 120 / 240VOLT InstallationsWall Mounted Thermostat Wiring Not Available with no Heat Installation Flame Override Switch WiringWall Switch Fireplace Ground G Wiring Diagram Lower Section Wiring Upper Wiring Schematic Dimplex

BF33ST/DX, BF39ST/DX specifications

The Dimplex BF39ST/DX and BF33ST/DX electric fires are innovative heating solutions that combine stylish design with advanced technology. Both models are part of Dimplex's extensive range of electric fires, designed to offer both functionality and aesthetic appeal, making them ideal for modern homes.

The BF39ST/DX model features a larger viewing area with a 39-inch width, while the BF33ST/DX offers a slightly smaller 33-inch width. This provides homeowners with flexibility when selecting the right size for their living spaces. Both models are designed to fit seamlessly into any room, offering a contemporary and appealing look that enhances the existing décor.

One of the standout features of these electric fires is the realistic 3D flame effect, Dimplex's patented Opti-myst technology. This advanced technology creates a lifelike flame and smoke effect using water vapor, providing an ambiance that closely resembles that of a traditional wood-burning fire. The flames can be adjusted for intensity, allowing users to customize the experience according to their preferences.

In terms of heating efficiency, both the BF39ST/DX and BF33ST/DX come with a 2kW fan heater that allows for rapid warming of spaces. Users can choose between two heat settings, enabling efficient temperature control and energy savings. This feature is particularly useful during colder months when immediate warmth is a priority.

Both models are equipped with a remote control, providing convenience for users to adjust settings from the comfort of their seat. This feature includes a timer function, allowing users to set the fire to operate for a specific duration or program it to turn off automatically.

Safety is paramount, and Dimplex has integrated essential safety features into both models. The fires are designed with an auto shut-off function that activates if the heater overheats, ensuring peace of mind for users.

Another notable characteristic is the ease of installation. The BF39ST/DX and BF33ST/DX can be wall-mounted or inset, providing flexibility in installation options to suit various home layouts. Their lightweight design simplifies repositioning, making it easy to change the fire's location if desired.

In summary, the Dimplex BF39ST/DX and BF33ST/DX electric fires offer a perfect blend of modern design, advanced heating technology, and user-friendly features. With their realistic flame effects, efficient heating, safety mechanisms, and flexibility in installation, these electric fires are an excellent heating solution for any contemporary living space.