Dimplex BF33ST/DX, BF39ST/DX manual Wall Mounted Thermostat Wiring, 120 / 240VOLT Installations

Page 17

WALL MOUNTED THERMOSTAT WIRING

FOR 120/240 VOLT

NOTE:

Before installing the unit complete the following:

1.Install main power connection with appropriate voltage as per Section C or Section D.

2.Install a 2 conductor wire with ground (3 wires total) from the thermostat wall box to the junction box on the unit.

NOTE:

Wiring of the thermostat must be completed prior to installing the unit.

NOTE:

The following installation instructions are for a single pole thermostat.

120 / 240VOLT INSTALLATIONS

1.Loosen the screw securing the junction box and remove the cover.

2.Remove the knockouts (if necessary) or use the provided cable clamp.

3.Pull out the three wires marked 1, 2, and G. (red, red, and green).

4.Remove the wire connector and separate the wires marked 1 & 2.

5.Connect the (red) 1 wire from the unit to the white (neutral) wire from the wall thermostat box by using a wire connector. (not supplied)

6.Connect the other end of the white (neutral) wire from the thermostat wall box to the red wire from the wall thermostat.

7.Connect the (red) 2 wire from the unit to the black wire from the thermostat wall box by using a wire connector. (not supplied)

8.Connect the other end of the black wire from the thermostat wall box to the black wire from the wall thermostat.

9.Connect the green (ground) wire from the unit to the green (ground) wire from the thermostat wall box by using a wire connector. (not supplied)

10.Connect the other end of the green (ground) wire to the thermostat wall box ground screw.

11.Ensure that all connections are tight.

12.Insert all the wiring of the wall mounted thermostat into the wall box.

13.Insert all the wiring back into the unit and secure with a cable clamp.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents BF33ST/DX BF39ST/DX BF45ST/DX Contents Listings and Code Approvals Recommended Wire and Fusing Requirements Section B Recommended Power Supply Wire SpecificationsMounting Flanges Voltage Selector Switch LocationVolt Installation 120 Volt Installation no Heat Installation Volt Installations Section D Main Power Wall Switch Wiring Options For 240 VoltWiring Diagram Main Power Wall Switch Wiring For 120 Volt Fireplace Wall Volt Installations No Heat Installation For 120/240 Volt 120 / 240 Volt InstallationsDiagram for 120/240 Volt 120 / 240VOLT Installations Wall Mounted Thermostat WiringWall Mounted Thermostat Wiring Flame Override Switch Wiring Not Available with no Heat InstallationWall Switch Fireplace Ground G Wiring Diagram Lower Section Wiring Upper Wiring Schematic Dimplex

BF33ST/DX, BF39ST/DX specifications

The Dimplex BF39ST/DX and BF33ST/DX electric fires are innovative heating solutions that combine stylish design with advanced technology. Both models are part of Dimplex's extensive range of electric fires, designed to offer both functionality and aesthetic appeal, making them ideal for modern homes.

The BF39ST/DX model features a larger viewing area with a 39-inch width, while the BF33ST/DX offers a slightly smaller 33-inch width. This provides homeowners with flexibility when selecting the right size for their living spaces. Both models are designed to fit seamlessly into any room, offering a contemporary and appealing look that enhances the existing décor.

One of the standout features of these electric fires is the realistic 3D flame effect, Dimplex's patented Opti-myst technology. This advanced technology creates a lifelike flame and smoke effect using water vapor, providing an ambiance that closely resembles that of a traditional wood-burning fire. The flames can be adjusted for intensity, allowing users to customize the experience according to their preferences.

In terms of heating efficiency, both the BF39ST/DX and BF33ST/DX come with a 2kW fan heater that allows for rapid warming of spaces. Users can choose between two heat settings, enabling efficient temperature control and energy savings. This feature is particularly useful during colder months when immediate warmth is a priority.

Both models are equipped with a remote control, providing convenience for users to adjust settings from the comfort of their seat. This feature includes a timer function, allowing users to set the fire to operate for a specific duration or program it to turn off automatically.

Safety is paramount, and Dimplex has integrated essential safety features into both models. The fires are designed with an auto shut-off function that activates if the heater overheats, ensuring peace of mind for users.

Another notable characteristic is the ease of installation. The BF39ST/DX and BF33ST/DX can be wall-mounted or inset, providing flexibility in installation options to suit various home layouts. Their lightweight design simplifies repositioning, making it easy to change the fire's location if desired.

In summary, the Dimplex BF39ST/DX and BF33ST/DX electric fires offer a perfect blend of modern design, advanced heating technology, and user-friendly features. With their realistic flame effects, efficient heating, safety mechanisms, and flexibility in installation, these electric fires are an excellent heating solution for any contemporary living space.
Top Page Image Contents