INSTALLATION
5)Mount the Top Faceplate by carefully sliding the Mounting Plates on the Left and Right Side Faceplate thru the Retainers in the Top Faceplate.
NOTE: Slowly lower the Top Faceplate into position; being careful not to damage the Mantel Top.
| Top |
Retainer | Faceplate |
Mounting Plates
Right Side | Left Side |
Faceplate | Faceplate |
| Backside of Unit & Faceplate Shown. |
6)Carefully slide the Mantel Top back into position.
Slide Mantel
Top back.
7) Location of Insulations
a)Place 1 piece of Insulation behind the Mantel Top.
b)Cut the second piece of Insulation in half, then install behind both the Left and Right Sides as shown.
Insulation
8)The unit may now be slid into fi nal position.
Hampton HI300 Wood Cast Insert | 11 |