VCS501 Series Assembly
Step 8: Attach Towel Bars, Utensil Hooks and Spit Rod Storage Brackets
Parts Required |
| |
Left Side | Right Side | |
(1) Towel Bar | (1) Towel Bar | |
(3) | Utensil Hooks | (4) |
(4) |
| |
Spit Rod Storage Bracket
(2)Brackets (30005427)
Towel Bars and Utensil Hooks Figure 9
Slide three (3) utensil hooks into the towel bar. (Left side only)
Attach towel bar with utensil hooks to left side condiment tray as shown using four (4)
Attach towel bar without utensil hooks to right side condiment tray.
Spit Rod Storage Brackets
Figure 10
The spit rod storage brackets are located on the back upper panel of the grill.
Tilt the bracket as shown, so the larger end of the bracket will fit | Figure 10 | |
into the opening. Then slide the bracket down. Repeat for both | ||
| ||
brackets. |
|
Figure 9
Spit Rod Storage
Bracket
Towel | ||
1/2” Screws | ||
Bar | ||
(50000337 | ||
|
Utensil Hooks | B351 |
|
Rear View
Shown with optional skirt
B224 |
Spit Rod
Storage
B225
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended.
10 | 30005436 |