Vermont Casting VCS501 manual Grease Pan / Grease Cup Installation

Page 5

VCS501 Series Assembly

Step 3: Grease Pan / Grease Cup Installation

Parts Required:

(1)Grease Pan

(1)Grease Cup

Figure 4

Install grease pan from back side of unit. NOTE: Be sure the grease tray is posi- tioned with the opening in the bottom of the grease tray located over the grease cup.

Place grease cup into grease cup holder attached to bottom of left brace support.

Figure 4

Grease

Shown with optional skirt

Tray

Grease

Cup

B159

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov- ing the grill is recommended.

30005436

Image 5

Contents Assembly Procedures VCS501 Series Unpack Carton and Verify Contents Parts Required Install the CastersFigures 2 Attach Skirt OptionalGrease Pan / Grease Cup Installation Kit Shelf Right Contents Kit Condiment Tray ContentsKit Shelf Left Contents Right Side Shelf Left Side ShelfSteps 4 & 5 Right & Left Side Shelf Assembly Parts Required Right Shelf Assembly Attach Right Shelf Assembly to GrillParts Required Left Shelf Assembly Attach Left Shelf Assembly to GrillSpit Rod Storage Brackets Parts Required Left Side Right SideSpit Rod Storage Bracket Install the Backlighting Batteries Attach Side Burner AssemblyInstall the Ignitor Battery Cooking Tips Smoker Box Install the Internal ComponentsWarming Rack Cooking Grates Install the LP Cylinder LP Models only Install the Natural Gas Hose Natural Gas NG Models only Cook Light #10-24 x 1/2 Screws 50000337 Figures 19, 20 Install Shelf LightVCS501 Series Assembly Mhsc