Piezo Starter Electrode Wire end to Starter

FIG. 8B

· Insert Side Burner tube through large hole in Side Burner Pan. Allow threaded stud to go through hole in Electrode bracket while laying the Burner flat. (FIG. 8C) Be sure to fit the Side Burner tube over the Side Burner valve nozzle. (FIG. 8D) Secure Side Burner with M4 Wingnut.

(23) Wingnut, M4

Threaded

Stud

(35) Side Burner Grid

1 pc

FIG. 8A

(32) Side Burner

Electrode 1 pc

(33) Side Burner

1 pc

(23) Wingnut, M4

1 pc

Step 8) Assemble Side Burner Electrode and Side Burner:

·Feed Electrode wire through upper left hole from large center hole in Side Burner Reflector. (FIG. 8A) Allow electrode to follow wire into hole and lie flat. (8B)

Side Burner

Electrode

Electrode Wire through hole

		Side Burner tube
		end fitted over
		valve nozzle
FIG. 8C	FIG. 8D

·Attach Electrode Wire end to side terminal of piezo starter under the Control Panel. Be careful not to bend or break terminal. (FIG. 8E)

Piezo Starter

Electrode Wire end to Starter

FIG. 8E