Meco 7900 manual Assemble Axle, Wheels & Wheel Covers

STEP 2) Assemble Axle, Wheels & Wheel Covers:

(9) with Item (11) installed

							M8
						(11) Nut,
						2 PCS			(12) WHEEL COVER
			(10) WHEEL							2 PCS
	WHEEL LEGS	(9) AXLE		2 PCS	(10) WHEEL			(11)	Nut, M8
										(12) WHEEL
Push Axle through holes in Wheel Legs. Place Wheels											COVER
on both ends of Axle, then tighten with two M8 Nuts
with wrench or pliers. Align Wheel Cover pins with
3-holes in Wheel and snap flush against wheel.
		FIG. 2

Step 3) Assemble Hood/Bowl to Cart:

(14)Hood/Bowl Assembly

·With Cart upright, align Bowl Bracket legs with Cart legs. (FIG. 3A)

NOTE: REQUIRES 2-PERSONS

·Lower Hood/Bowl to allow ends of Cart legs to insert into Bowl Bracket legs.

·Press downward until leg screw holes align.

·Insert M6x35 Screws and tighten with M6 Locknuts. (FIG. 3B)

	(15) Screw, M6X35	(16) M6 Locknut
	4 pcs	4 pcs
Bowl Bracket Legs
		(15) M6 Nut
		(16) Screw, M6X35
FIG. 3A	FIG. 3B
7