Step 4) Install Drip Cup:
Insert Drip Cup into Drip Cup Holder ring until the cup flange is flush with the ring and the notch in the lip of the cup fits the vertical hanger wire.
Align groove with vertical wire
(17) Drip Cup
Step 5) Assemble Sidebraces and Rear Crossbrace:
·Attach Right and Left Sidebraces (19 & 20) to legs with ST4.0 x 10 Screws. (FIG. 5A) Secure Bottom Heat Shield to Left Sidebrace with M4x10 Screws and M4 Wingnuts. (FIG. 5B) Allow Heat Shield Edge to overlap Sidebrace edge.
(21) Screw, ST4.0x10 | (22) Screw, | (23) Wingnut, M4 |
M4x10 | ||
6 pcs | 2 pcs | 2 pcs |
(23) M4 Wingnut
(22) Screw,
M4x10
Heat Shield
edge over
Crossbrace
edge
(20 Left Sidebrace
(21) Screw,
ST4.0x10
(24)Rear CrossBrace
(19) Right Sidebrace | FIG. 5A |
|
8
FIG. 5B
View Inside Bowl
Bowl/Leg Screws
FIG. 5C