Meco 7900 manual Important Notice

Page 23

IMPORTANT NOTICE

This Gas Grill must be used with a LP Gas Cylinder equipped

with an OPD (Overfill Prevention Device).

This is a secondary device to prevent the overfill of your LP Gas cylinder. The proper methods for the filling of your LP Gas cylinder are by weight or volume, as described in NFPA 58. Please make sure your filling station fills your LP Gas cylinder by weight or volume. Ask your filling station to read purging and filling instructions on the LP cylinder before attempting to fill.

Raises up while filling then stops when full.

Rises up while filling then stops when full.

Do not exchange the LP Gas cylinder unless the exchange LP cylinder is equipped with an OPD. Otherwise you will lose the OPD (Overfill Prevention Device) feature. If there is not an LP cylinder available for exchange equipped with an OPD, we recommend that you have your cylinder filled at an authorized LP gas dealer by a qualified attendant.

23

Image 23 Contents
LP Gas Grill Assembly and Use Manual Assembly Instructions ContentsParts Illustrations Page 03.6222.02 Tools Push Axle through holes in Wheel Legs. Place Wheels Assemble Axle, Wheels & Wheel CoversAlign groove with vertical wire Drip Cup Page Piezo Starter Electrode Wire end to Starter Side Burner Grid Side Table Assembly Finished Flame Diffuser mounting stud in Bowl CONNECTING/DISCONNECTING the GAS Installation Codes Before Using Your LP GAS GrillSurrounding the connections and fittings How to perform a leak testLighting the Grill Using the Ignitor Manual Lighting Check Your FlameOperating the GAS Grill Manual Lighting the Side BurnerWarming Rack Roasting CookingEND of Cooking Session Care and MaintenancePage Problem Possible Cause Solution TroubleshootingTroubleshooting Cont’d Important Notice REV 2/23/07 Meco Corporation Limited Warranty
Related manuals
Manual 24 pages 57.23 Kb