6 x 5mm nut
6 x 12mm
Phillips Hex Bolt
BRINKMANN
DALLAS, TX 75244
BRINKMANN
DALLAS, TX 75244
Step 8
To attach all four vent covers to insides of lid and body, place vent cover on the inside of the unit with the adjustment tab sticking through one of the air vent holes. Using 6 x 12mm screw and nut, secure vent cover to the unit. Do not overtighten the nut as this will make the vent difficult to open and close.
Step 9
Attach three wooden slats to each set of side shelf supports using 6 x 50mm bolts and 6 x 3.5mm nuts.
Wooden
Shelf Slat
Leg/Shelf
Bracket
Step 10
Install heat indicator in lid by aligning tabs on heat indicator with slots in the opening on front of lid. Insert and turn 4 revolution until the word “IDEAL” on heat indicator is at top of dial.
6