Shelf Bracket
(Grill King)
Front Leg
(Grill King)
Air
Vent
Front (Long) Leg 
(Grill King Deluxe)
Rear (Short) Leg
(Grill King Deluxe)
Rear (Short) Leg
(Grill King)
curved end
pointed down
Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay cardboard down to protect grill finish and assembly area.
Step 1
Stand body of grill on one end. Insert shelf brackets into legs without axle holes (Grill King only). Align the bolt holes in the longer set of legs to bolt holes in the body. Insert two 6 x 50mm screws through each leg and secure with nut (hand tighten only at this point).
Step 2
With the help of a friend, turn the body to the opposite side. Align the bolt holes in the short legs to bolt holes in the body. Insert two 6 x 50mm screws through each leg and secure with nut (hand tighten only at this point).
Step 3
Insert wire wood rack (curved ends pointed down) into holes on bracket near bottom of legs then tighten all bolts and nuts until secure.
Step 4
Insert axle through axle holes in short legs. Place wheels on axles with recessed hubs facing out. Insert wheel cap through center of wheel to secure the wheel to the axle. Push until secure.
Push Cap
4