Char-Broil 7201560 owner manual Inside

Page 7

9

NOTE: Smoker chamber door not pictured for clarity.

From inside the smoker chamber, slide the smokestack through the large hole. Align the two holes in the smokestack plate

with the holes in the chamber and secure with two 1/4-20x3/4”hex-head bolts outside the chamber and 1/4-20 flange nuts

inside.

Smokestack

Smokestack plate

NOTE: Firebox and smoker chamber not pictured for clarity.

10Attach wood handle to smoker chamber door using two 1/4-20x4” screws, wood handle spacers, fiber washers and 1/4-20 flange nuts, as shown below. Repeat to attach handle to firebox door.

Smoker Chamber

Door

Handle

Fiber Washer

Firebox

Door

Wood Handle Spacer

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Smoker, BBQ and Grill Center Operation are 800 A.M. To 600 P.M. EST Monday Friday No need to go back to the storeDo not fully tighten screws until is complete Upward, parallel to leg braces For clarity Fully Tighten ALL Screws and Nuts AT This TimeAre included with ignitor Bolts as shown belowInside Do not fully tighten until Step Slat Screws If you have purchased the optional 3 Temperature GaugeGrease Clip Grate Support Screws Large Porcelain Cooking Grate Small Porcelain Cooking Grate Hardware List Preparing and Using Your Silver Smoker Limited Warranty Char-Broil, LLC Columbus, GA 31904 Assembly Instructions
Top Page Image Contents