Char-Broil 7201560 owner manual Do not fully tighten until Step

Page 8

NOTE: Smoker chamber door not pictured for clarity.

12Attach shelf brackets to outer holes on front of smoker chamber using two 1/4-20x1-1/4”hex-head bolts and 1/4-20 flange nuts.

DO NOT FULLY TIGHTEN until Step 13.

NOTE: Smoker chamber door not pictured for clarity.

11 Install grate support screws in the four rear holes and two front-centerholes in the smoker chamber. Use six #10-24x1” screws and #10 flange nuts.

Do not fully tighten until Step 13.

Shelf bracket

Image 8

Contents Smoker, BBQ and Grill No need to go back to the store Center Operation are 800 A.M. To 600 P.M. EST Monday FridayDo not fully tighten screws until is complete Upward, parallel to leg braces Fully Tighten ALL Screws and Nuts AT This Time For clarityBolts as shown below Are included with ignitorInside Do not fully tighten until Step If you have purchased the optional 3 Temperature Gauge Slat ScrewsGrease Clip Grate Support Screws Large Porcelain Cooking Grate Small Porcelain Cooking Grate Hardware List Preparing and Using Your Silver Smoker Limited Warranty Char-Broil, LLC Columbus, GA 31904 Assembly Instructions