Installation
Registering the repeater to the main monitor station
(REGISTRATION/CANCELLATION)
To use the repeater, the registration to your main monitor station is required.
LThe� repeater can only be registered to one main monitor station at a time.
Registering the repeater (REGISTRATION)
1Connect the AC cord to the AC adaptor, then connect the AC cord to a power outlet installed nearby the main monitor station.
L�The POWER indicator lights in green.
DC IN jack | To power outlet | |
(100 – 240 V AC) | ||
| ||
Lights in green. | AC adaptor | |
| ||
DC plug | AC cord |
2Perform the registration operations using the main monitor station.
L�Read “Setting a repeater” in the Operating Instructions included with the wireless video intercom system.
3Press and hold {PROGRAM} on the repeater for about 3 seconds within 2 minutes after completing the main monitor station operations.
L�The STATUS indicator flashes in green and then lights up in green after completing the registration.
(Depending on the radio signal status, the indicator may light in amber or red, or flash in red instead of lighting in green.)
{PROGRAM}
Flashing in green.
Lights in green.
12