Installation
Installing the repeater
After completing the registration to the main monitor station, install the repeater. LRefer to “For best performance” on page 5.
1Connect the AC cord to the AC adaptor, then connect the AC cord to the power outlet. L�The POWER indicator lights in green.
DC IN jack | To power outlet | |
(100 – 240 V AC) | ||
| ||
Lights in green. | AC adaptor | |
| ||
DC plug | AC cord |
2Confirm the STATUS indicator.
L�The STATUS indicator shows the radio signal status. Install the repeater in a location where the indicator lights in green.
STATUS |
| Status |
|
indicator |
|
| |
|
|
| |
Lights in green. | Strong | Able to install the |
|
repeater. |
| ||
|
|
| |
|
| LIn places where the |
|
Lights in amber. |
| indicator lights in |
|
|
| ||
| amber or red, calls |
| |
|
|
| |
|
|
| |
|
| may be interrupted |
|
Lights in red. | Weak | or disconnected. |
|
|
| ||
| Out of range | Unable to install the |
|
Flashing in red. |
| repeater. |
|
|
| Change the location. |
|
3Install the repeater.
Note:
L�It is recommended that you install the repeater in a location where the STATUS indicator lights in green although you can install it in other places where the indicator lights in amber or red.
L�Use only the included Panasonic AC adaptor PQLV202.
14