Panasonic VL-FAN1BX operating instructions Installation, While in use

Page 6

Important Information

Installation

L�If there are no obstacles between this unit and the main monitor station, you can install the unit within about 100 m from the main monitor station.

(Usage area varies depending on the location where the unit is installed. Install the unit in the locations where the STATUS indicator lights in green (page 14).)

Lights in green.

While in use

LIfthere are no obstacles between this unit and the sub monitor station, the sub monitor station can be used within about 100 m of this unit.

(Usage area varies depending on the location where the unit is installed.)

LInplaces where the radio signal from the main monitor station is stronger, the main monitor station directly communicates with the sub monitor station without relaying through the repeater. (In this case, the IN USE indicator may not light up.)

In places where the radio signal from the main monitor station is stronger, the main monitor station communicates with the sub monitor station without relaying through the repeater.

In places where the radio signal from the repeater is stronger, the main monitor station communicates with the sub monitor station by relaying through the repeater. (The IN USE indicator lights in green.)

Radius of radio waves

Radius of radio waves

from the main monitor

station.

from the repeater.

6

Image 6
Contents Operating Instructions Introduction InstallationImportant Information PreparationImportant safety instructions Additional safety information Location/avoiding noise Before usingFor best performance EnvironmentInstallation While in useUsing near medical equipment Product names used in these Operating InstructionsTapping Included items QuantityFeature highlights Possible obstaclesLocation of controls Indicators Indicator StatusWeak Registering the repeater to the main monitor station Registering the repeater RegistrationTo stop using the repeater Cancellation Strong Installing the repeaterStatus Indicator Out of rangeWall-mounting Wall mount templateTroubleshooting Indicator Problem Cause & SolutionOthers Problem Cause & Solution Cleaning Resetting to the default settingsClean the repeater with a soft, dry cloth Technical data about this product Factory Default Reset IndexFor your future reference Attach your sales receipt hereCopyright PFQX2460ZA SC0406SM0