Installation
Wall-mounting
You can mount the repeater on the wall with the included wood screws and washers. Mount the repeater on a wall (pillar) where the wood screws can be firmly fixed.
1Drive the wood screws with washers into the wall (pillar).
Approx. 60 mm
2Mount onto the wall, directing the wood screws into the slots on the repeater, and slide the repeater down until it is secure.
L�About 140 mm of space above the washers is required for raising the antenna.
Approx. 140 mm
Wall mount template
Wood screw | 2.5 – 3 mm |
(included) |
|
Washer | Wall |
(included) | (Pillar) |
Important:
L�Do not mount the repeater on walls made of plasterboard, ALC (Autoclaved Lightweight aerated Concrete panel), concrete block, or plywood of 18 mm or less in thickness.
Approx. 60 mm
15