Panasonic VL-FAN1BX operating instructions Troubleshooting, Indicator Problem Cause & Solution

Help

Troubleshooting

Indicator

Problem	Cause & Solution	Page
The POWER indicator is	L�The power is not turned on. Connect the AC	14
turned off.	adaptor.
The STATUS indicator is	L�The repeater has not been registered. Register it	12
turned off.	to the main monitor station.
The STATUS indicator is	L�The power of the main monitor station is not	—
flashing in red.	turned on. Turn it on.	14
	L�The repeater is out of range. Install it in a
	location where the STATUS indicator lights in
	green.
The IN USE indicator	L�The repeater is relaying radio waves.	—
lights in green.
The IN USE indicator is	L�The sub monitor station is being used in a place	6
turned off when using the	where the radio signal is stronger from the main
sub monitor station.	monitor station than the repeater. (This is not
	malfunction.)
Others
Problem	Cause & Solution	Page
Can I register the	L�You cannot register one repeater to two or more	—
repeater to another main	main monitor stations. To register to another
monitor station?	main monitor station, another repeater is
	needed.
Can I locate the repeater	L�You can install the repeater in a location where	14
in a place where the	the STATUS indicator lights in amber or red,
STATUS indicator does	but sound cuts in and out, or calls may be
not light in green?	disconnected. We recommend a location where
	the indicator lights in green.
Can I locate the repeater	L�Do not install the repeater outdoors.	—
outdoors?
The repeater does not	L�The STATUS indicator lights in amber or red,	14
improve the radio signal.	or is flashing in red. Reinstall the repeater in a
	location where the indicator lights in green.	6
	L�The repeater has been installed near the main
	monitor station. In this location, the repeater
	cannot work effectively because the sub monitor
	station receives radio waves from only the main
	monitor station. Reinstall it in a location near to
	where the sub monitor station is used.

16