19
6 x | 3/8”(10mm) |
|
|
5. Transformer/Rear Cart Panel Installation
Install the transformer and the power bar onto the rear panel as illustrated using (6) M4 x 8mm screws and (6) M4 lock nuts. Route the power cord through the rubber grommet in the rear panel.
Fit the rear cart panel between the two end panels; ensure the large holes in the rear panel are to the bottom of cart as illustrated. Fasten using (6) #14 x 1/2” screws, three on each side.
485RSIB MODEL
Ensure power bar is installed with covers to the top.
www.ultrachefgrills.com